Young Engineer's
Young Engineer's Guide
作者：Rohan, J. V.
体例：题 章数：132
字数：182,318 来源：Project Gutenberg
版本与结构
- 来源版本
- 本站收录 1 个来源：Project Gutenberg（182,318 字）。
- 分章依据
- 按「题」标记切分为 132 题（Gutenberg 卷册标记）。
- 篇幅分布
- 平均每题 1,381 字。
- 原文溯源
cache/epub/66109/pg66109.txt（Project Gutenberg）
章节目录
共 132 题- YOUNG ENGINEER’S GUIDE.
- RACINE, WISCONSIN.
- INDEX.
- Injector, 83
- Jet Pump, 97
- Knocks or Pounds, 137
- PREFACE.
- HINTS TO PURCHASERS.
- DUTIES OF ENGINEERS.
- HORIZONTAL TUBULAR BOILER.
- LOCOMOTIVE BOILER.
- RETURN FLUE BOILER.
- REYNOLDS CORLISS CONDENSING AND NON-CONDENSING ENGINE.
- VERTICAL BOILER.
- WATER TUBE BOILER.
- J. I. CASE TRACTION ENGINE.
- J. I. CASE RETURN FLUE TRACTION ENGINE.
- QUESTIONS WITH ANSWERS,
- GARR-SCOTT TRACTION ENGINE.
- NICHOLS & SHEPARD TRACTION ENGINE.
- CAUTION.
- CALKING FLUES.
- CLEANING FLUES.
- BLOWER.
- EXHAUST NOZZLE.
- FUSIBLE PLUG.
- LOW WATER ALARM.
- J. I. CASE AUTOMATIC HIGH SPEED ENGINE.
- STEAM ENGINES.
- STEAM CYLINDER.
- PISTON AND ROD.
- STEAM CHEST.
- VALVE.
- CROSS-HEAD.
- ENGINE FRAME.
- CONNECTING ROD.
- CRANK.
- CRANK-PIN.
- LINK REVERSE.
- RUMELY TRACTION ENGINE.
- LINK.
- REVERSE LEVER.
- ECCENTRICS.
- ECCENTRIC STRAP.
- ECCENTRIC ROD.
- WOOLF VALVE GEAR.
- GOVERNOR.
- AUTOMATIC OILER.
- Single Connection Detroit Oiler.]
- INJECTOR.
- DIRECTIONS FOR OPERATING WORLD INJECTOR.
- THROTTLE.
- STEAM PUMP.
- MARSH STEAM PUMP.
- Capacity 10 to 35 Horse-Power.]
- DIRECTIONS FOR SETTING UP AND RUNNING.
- HEATER.
- EJECTOR.
- JET PUMP.
- STEAM GAUGE.
- SAFETY VALVE.
- GLASS WATER GAUGE.
- BLOW OFF VALVE.
- GAUGE COCK.
- CYLINDER COCKS.
- CHECK VALVE.
- COMPRESSION GREASE CUP.
- MINNEAPOLIS TRACTION ENGINE.
- TRACTION ENGINES.
- GEARING.
- DIFFERENTIAL GEAR.
- FRICTION CLUTCH.
- QUESTIONS WITH ANSWERS,
- ADVANCE TRACTION ENGINE.
- REVERSING AN ENGINE.
- WATERTOWN HIGH SPEED ENGINE.
- TESTING PISTON RINGS AND VALVES.
- KNOCKS OR POUNDS.
- TO REMEDY KNOCKS OR POUNDS OF A STEAM ENGINE.
- HEATING OF JOURNALS.
- PACKING PISTON AND VALVE RODS.
- SETTING A PLAIN SLIDE VALVE.
- SETTING SLIDE VALVE OF REVERSING ENGINES.
- TO SET VALVES OF DUPLEX PUMP.
- ASCENDING HILLS.
- FRICK TRACTION ENGINE.
- DESCENDING HILLS.
- ENGINE STALLED.
- CROSSING BRIDGES AND CULVERTS.
- FOAMING.
- PRIMING.
- FIRING WITH WOOD.
- FIRING WITH STRAW.
- FIRING WITH COAL.
- BANKING FIRES.
- LAYING UP A TRACTION ENGINE.
- BELTING.
- ARMINGTON & SIMS HIGH SPEED ENGINE.
- GENERAL INFORMATION.
- GEISER TRACTION ENGINE.
- WORKSHOP RECIPES.
- BABBITTING BOXES.
- COMPOUND ENGINES.
- BALL TANDEM COMPOUND ENGINE.
- EXAMINATION OF ENGINEERS APPLYING FOR A LICENSE.
- QUESTIONS WITH ANSWERS.
- A. W. STEVENS TRACTION ENGINE.
- M. E. P. = 40 lbs.
- J. I. CASE PORTABLE SKID ENGINE.
- RULES AND TABLES.
- RULES FOR CALCULATING THE SPEED OF GEARS AND PULLEYS.
- SHAFTS AND PULLEYS.
- CIRCUMFERENCE AND AREAS OF CIRCLES.
- EFFECTIVE PRESSURE OF STEAM ON PISTON.
- MEASURE OF LENGTH.
- MEASURE OF VOLUME.
- LIQUID MEASURE.
- BARREL MEASURE IN WEIGHT.
- WEIGHT OF CAST IRON BALLS.
- WEIGHTS AND MEASURES.
- AVOIRDUPOIS OR COMMERCIAL WEIGHT.
- SQUARE MEASURE.
- TABLE OF DISTANCE.
- SHRINKAGE OF CASTINGS.
- WEIGHT OF ROUND AND SQUARE ROLLED IRON PER LINEAL FOOT.
- TABLE OF THE CAPACITY OF CISTERNS IN GALLONS
- MELTING POINT OF METALS, ETC.
- WEIGHT OF METALS PER CUBIC FOOT.
- HORSE-POWER LINE SHAFTING.
- HALF-ROUND, OVAL AND HALF-OVAL IRON.
- WEIGHT OF FLAT ROLLED IRON, PER FOOT.
- HORSE-POWER BELTING.