A. Report of the action of the dynamo should be made upon the work book
at the terminal.
40. Q. If clutch rod No. 78-B should break while on the road, what could
be done to get use of the lamp?
A. A piece of wire could be used by fastening one end around the end of
top lever No. 59, the other end being attached to clutch through eye.
41. Q. If you should lose the clothespin holder or top carbon clutch,
what could be done to get the light?
A. Would fasten a wire around the carbon and top holder to keep carbon
in line, being careful not to get the wire either too tight or too
loose.
42. Q. If you should lose the iron armature No. 64 in solenoid, what
could be done to get use of light?
A. Would use a common iron bolt and suspend same by wire in magnet.
43. Q. What would be the result if any of the levers of the lamp should
bind?
A. All levers of the lamp must work absolutely free and must not drag,
for if they are not perfectly free the carbon cannot feed properly.
=Pyle-National Electric Incandescent Headlight=