BATTERY FLUIDS AND SOLUTIONS.
_21. Sulphuric Acid._ THIS ACID MUST BE HANDLED WITH GREAT CARE, as it
(the concentrated) is very strong, and will burn the hands, eat holes in
clothing, carpets, etc.; it will even char wood. Do not let any of it
drop anywhere accidentally. If you wish to pour concentrated acid into a
bottle, place the bottle to be filled upon a plate, and wipe all drops
of acid from the outside of it afterward. The concentrated acid should
be kept in tightly-corked bottles, as it absorbs moisture from the air
very rapidly. Ordinary corks should be paraffined if they are to be used
in acid bottles, or they will be soon eaten up.
22. Mixing. When sulphuric acid and water are mixed, considerable heat
is produced. Never pour water into the acid, as the heat would be
produced so rapidly that the vessel containing the mixture might break.
Always pour the acid into the water, and thoroughly stir the mixture at
the same time. Earthen vessels do not break when heated as easily as
glass ones. The mixing may be done in ordinary glass fruit-jars, if care
be taken to pour the acid slowly into the water. The jars should be set
in some larger dish, or in the sink, before adding the acid. If they get
too hot, allow them to cool a little before proceeding with the mixing.
As the acid is much heavier than water, it will immediately sink to the
bottom of the jar, unless constantly stirred.
23. There are different grades of acid upon the market. For battery
purposes you do not need the chemically pure (C P) acid. The ordinary
"commercial acid" is all right, even though it is a little dark in
color. You can get this at any drug-store. Get 5 or 10 cents' worth at a
time.
APPARATUS 14.
_24. Battery Fluid for Simple Cells._ For the simple cell (App. 5), when
it is to be used for experiments with detectors or in the study of
polarization, etc., a very dilute acid is best. Mix 1 fluid ounce of
commercial acid with 1 pint of water. This will make 17 fluid ounces
(See App. 19), and your mixture will be one-seventeenth acid. Make up a
pint or quart bottle of this at a time, and label it with the date:
Dilute sulphuric acid.
1 part acid, 16 parts water.
Apparatus 14.
25. Note. Do not fail to paste a label on all bottles as soon as you
have put anything into them. Give the date, contents, and any other
information that will help you to reproduce the mixture again. Do not
write on them any abbreviations or other things that you will soon
forget.
APPARATUS 15.
_26. Battery Fluid; Bichromate Solution._ For running small motors,
shocking coils, etc., this solution will be found good when used with
the zinc and carbon elements given in App. 3 and 4. The bichromate
destroys the hydrogen bubbles which help to polarize cells so rapidly
when the plain dilute acid (App. 14) is used. (Study polarization.) The
zinc used in this fluid must be well amalgamated (App. 20).
Directions. With 1 quart of cold water placed in a glass or earthen
dish, slowly mix 4 fluid ounces of commercial sulphuric acid. Read
Sec. 22 carefully. When this gets about cold, add 4 ounces of
bichromate of potash. Powdered bichromate will dissolve more quickly
than the lump. Keep this fluid in corked bottles, labelled, with date:
Bichromate Battery Fluid.
Apparatus 15.
27. Always take the zinc from this fluid as soon as you have finished
experimenting, or even if you have no use for the cell for a few
minutes. The zinc and fluid are rapidly destroyed in bichromate cells
even when the circuit is open. Always wash the carbon and zinc as soon
as you take them from the fluid.
APPARATUS 16.
_28. Battery Fluid._ For 2-fluid cells (App. 7), a saturated solution of
copper sulphate (blue vitriol) is needed. Place some of the crystals in
a glass jar, with water, stir them around, and add the sulphate as long
as it is dissolved. A few extra crystals should be left in the stock
bottle so that the solution will always be saturated.
APPARATUS 17.
_29. Vinegar Battery Fluid._ For a few of the experiments with
detectors, etc., good strong vinegar does well as the exciting fluid.
This may be used with the copper and zinc or carbon and zinc elements.
The amount of current given with vinegar and App. 4 or 5 is sufficient
to show many of the simpler experiments.
APPARATUS 18.
_30. Battery Fluid._ Strong brine, made by dissolving ordinary salt in
water, will produce quite a little current with App. 4 or 5. The
presence of the current is easily shown with the astatic detectors.
APPARATUS 19.
_31. Measures for Water, Acids, etc._ If you do not own a graduated
glass, such as druggists use for measuring liquids, the following plan
will be found useful. In the mixing of battery fluids, etc., while it is
not necessary to be absolutely exact, it is necessary to know
approximately what you are doing.
An ordinary glass pint fruit jar may be taken as the standard. This
holds 16 fluid ounces, or 2 ordinary teacupfuls. A teacupful may then be
taken as 1/2 pint, or 8 fluid ounces. You can probably find a small
bottle that will hold 1 or 2 oz., and you can easily tell how much it
holds by filling it and counting the number of times it is contained in
the pint can.
A slim bottle holding 1/2 pint can be made into a convenient measuring
glass by scratching lines on it with the sharp edge of a hard file. The
lines should be placed, of course, so that they will show how much
liquid you must put into it to make 1 oz., 2 oz., etc. Instead of the
file marks, a narrow strip of paper may be pasted upon the bottle, and
the divisions shown by lines drawn upon the paper.
APPARATUS 20.
_32. To Amalgamate Battery Plates._ To keep the zinc plates or rods in
cells from being eaten or dissolved when the circuit is opened, they
should be amalgamated; that is, they should have a coating of mercury.
The local currents (see text-book) aid in rapidly destroying the zinc,
unless it is amalgamated. Do not amalgamate copper plates--merely the
zinc ones.
33. Place a few drops of mercury in a butter dish. Dip the zinc into the
solution of App. 14, then lay it upon a flat board. This is necessary
with thin sheet-zinc, as it becomes very brittle when coated with
mercury, and will not stand hard rubbing. If you also dip a very narrow
piece of tin into the dilute sulphuric acid, you can use this as a spoon
and lift one drop of mercury at a time from the butter dish to the zinc.
By tapping the tin upon the zinc, the mercury will leave the tin. Put
the mercury only where the zinc will be under the solutions in the cell,
then rub the drops around with a small cloth that has been dipped in the
acid. The zinc will become very bright and silvery, due to the mercury.
Do not get too much mercury on it, just enough to give it a thin coat,
as it will make the thin zinc so brittle that it will very easily break.
Amalgamate both sides of the zinc.