A. Such as are necessary to properly operate the locomotive, care for
the machinery, disconnect and block up in case of breakdown and the
necessary firing tools.
3. Q. What examination should be made after any repair work has been
done on valve, brasses, etc.?
A. See that brasses are properly fitted, keys fastened and nuts made
tight. If any repairs have been made on valves or valve gear, would see
that the reverse lever could be moved freely and that all movable parts
had been properly replaced; would also give especial attention with
reference to lubrication of these parts.
4. Q. What attention should be given to boiler attachments, such as
gauge cocks, water glasses, etc.?
A. Would see that the gauge cocks can be opened to try the water and
closed, so steam and water would not come out into cab. Observe the
water glass and note if water is moving up and down in the glass, see
that the steam valve at the top and water valve at bottom of glass could
be opened and closed, and allow water and steam to circulate freely
through the glass.