HOW TO COAT CANDIES, &c., WITH BAKER'S "DOT" CHOCOLATE

Half a pound of "Dot" Chocolate will coat quite a number of candy or

other "centers," but as depth of chocolate and an even temperature

during the whole time one is at work are essential, it is well, when

convenient, to melt a larger quantity of chocolate. When cold, the

unused chocolate may be cut from the dish and set aside for use at a

future time. If the chocolate be at the proper temperature when the

centers are dipped in it, it will give a rich, glossy coating free from

spots, and the candies will not have a spreading base. After a few

centers have been dipped set them in a cool place to harden. The

necessary utensils are a wire fork and a very small double boiler. The

inner dish of the boiler should be of such size that the melted

chocolate will come nearly to the top of it. Break the chocolate in

small pieces and surround with warm water, stir occasionally while

melting. When the melted chocolate has cooled to about 80° F. it is

ready to use. Drop whatever is to be coated into the chocolate, with the

fork push it below the chocolate, lift out, draw across the edge of the

dish and drop onto a piece of table oil cloth or onto waxed paper. Do

not let a drop of water get into the chocolate.

CHOCOLATE DIPPED PEPPERMINTS

(Uncooked Fondant)

[Illustration: CHOCOLATE DIPPED PEPPERMINTS.]

Prepare green, white, pink and chocolate colored mints by the first

recipe. After they have dried off a little run a spatula under each and

turn to dry the other side. Coat with Baker's "Dot" Chocolate.

Chocolate and Cocoa Recipes and Home Made Candy Recipes · 第 103 / 215 题