CHAPTER VI

BUTTON-HOLE AND BORDER STITCHES--HEMSTITCHING AND OPEN FILLINGS

“And she that is wise, her time will pris.”

=Part of a Curtain.=--This illustration (Plate IV.) gives a part of

a curtain, which is a fine piece of work. The design has been well

considered. The simple masses are admirably juxtaposed; they have been

skilfully arranged in a manner singularly appropriate to the work.

As a piece of embroidery that would generally be looked at from some

distance there has been no time spent on minute detail which would

involve unnecessary labour. The bold, yet dainty treatment of the

needlework is first-rate, and the whole arrangement of the design,

colour and stitchery show that the purpose for which the embroidery was

meant must have been continually in the mind of the worker.

The circular massed forms in rich reddish-orange are set, most

successfully, the one against the other; the green masses, so simple

in shape and satisfactory in colour, are clearly silhouetted against

the dark background; the white oblongs with the little orange circles,

the applied hem and bands in vivid blue, the interesting variation

in stitchery, all go to make a charmingly harmonious piece of simple

decoration. Work of this type can be made from materials which are

quite inexpensive, and its value on that account is increased tenfold.

In the illustration, the various parts of the design, colour and

stitchery are so clearly brought out that a detailed description is not

required. The background is of linen of a firm quality; the applied

forms may be of linen or of any firm material in wool or cotton; the

embroidery is in wools, cottons and silks. For the method of working

the button-hole filling, see Fig. 11. The large circular forms are

fixed to the foundation with a row of chain stitch; the little orange

circles on the white ground are in the same stitch (Fig. 1). The

blue bands are applied with darning or tacking stitch outlined with

coral stitch (Fig. 2), the hem with button-hole stitch. The effective

little groups of white on the green ground are in petal stitch (Fig.

3). All the little square blocks are in satin stitch. How interesting

this constructional design can become to the needlewoman who uses her

powers of mind and brain, and who applies her ideas to decorate all

manner of things. She would no longer be content to work detached

sprays of flowers and leaves, strewn promiscuously over her work, once

she discovered what good patterns she could make with simple shapes

and with the aid of small pieces of bright-coloured patches and short

lengths of material, which she might adapt and use for many purposes.

=Various Button-hole Stitches.=--Button-hole stitch is one of the most

useful of stitches, owing to its construction and adaptability, and

the decision with which it marks a line. It can be used equally well

for plain needlework, embroidery, or needle-point lace; for borders or

fillings, either open or solid, for the covering of raw edges, the

outlining of _appliqué_ forms, or the working of flowers or leaves. The

direction, spacing and grouping of the stitch may be arranged to suit

the work and curved lines may be followed with the utmost facility.

Indeed, the interesting variations and combinations which may be

obtained by an ingenious worker are endless.

[Illustration: FIG. 10A.]

There are two ways of working the stitch, single button-hole (Fig.

10A), and double or tailor’s button-hole; the former, when worked

with rather a wide space between each stitch, is generally known as

blanket stitch. Fig. 10A gives a corner for a border, which will also

make a suitable finish or heading to the neck of a dress or blouse;

it may be spaced in various ways, worked in slanting lines, or with

stitches of equal lengths, worked over threads or narrow braids of a

different colour or tone. When the heading forms a close line, it is

usually considered as a button-hole stitch. Plate I. shows two lines of

button-holing worked in groups of three, in orange wool, between two

rows of chequered chain stitch, where they serve to connect the broad

bands of orange which surround the border of the runner.

For the making of an actual button-hole, or where a firmer and more

decorative heading is wanted, it is better to use the variety known as

tailor’s button-hole, which has an extra knot added to it; it is this

knot which gives greater firmness as well as beauty to the stitch.

=To work Blanket Stitch= (=Fig. 10a=).--Blanket, or single button-hole

stitch, is so well known that it is hardly necessary to describe it.

Bring the needle out at the left end of the line or border; place the

thread under the left thumb and insert the needle as shown in Fig. 10A;

draw it through, still keeping the thumb on the thread--the needle is

thus brought out over it.

=Tailor’s Button Stitch.=--Tailor’s button-hole--the method of

working:--Put the needle into the same position, with the thread under

it, as for the single stitch, then take the thread, near the eye of

the needle, in the right hand and pass it from right to left again

under the needle; draw the needle through both loops and the stitch is

complete.

[Illustration: FIG. 10.]

=Crossed Button-hole= (=Fig. 10=).--Fig. 10 shows another variety

of the stitch. The threads are crossed by sloping the needle to the

right for the one, and to the left for the other. When worked on a

loosely-woven material they can easily be kept exact. The knotted edge

may be further strengthened by a row of chain stitch, which always

improves the line. As may be seen from the figure, either the under or

upper stitches may be the longer, but they should not be varied on the

same border, otherwise the regularity of the work will be impaired.

=Flowers in Button-hole Stitch= (=Plate XIII.=).--Fig. 11 may be used

for a solid or open groundstitch; it makes a charming filling when

worked over the material for the petals of large flowers, each petal

being outlined with chain stitch, couching, or back stitching (Plate

XI.). When working over a foundation, the first row and the last only

are fixed to the material; the intervening rows are worked into the

headings or loops of the preceding rows. When the spaces to be filled

with stitchery of this type are not of such a form as to allow of

working continuously, each row of stitchery must be attached to the

material at the sides, to keep it in position; the rows are then worked

to and fro from right to left, or _vice versâ_.

=“A Portière”= (=Plate IV.=).--In this piece of work an excellent

example of this method of filling is seen; the groups of five stitches

worked in lemon wool, on a black linen background, make a bright

chequered effect, which adds both interest and distinction to the

design.

[Illustration: FIG. 11.]

=Button-hole Filling of a Space= (=Fig. 11=).--Fig. 11 shows clearly

the method of filling an open space in this way. The edges must be

button-holed in the manner described for white work, unless a braid is

used, when the firm edge which it gives is sufficient without extra

stitching. Begin at the right upper corner; make three small overcast

stitches to carry the thread into position for working the first row,

which consists of groups of three button-hole stitches worked loosely

into the edges of the braid or material; at the end of the row fasten

the thread to the braid; again overcast three stitches; work the second

row of button-hole into the loops or spaces of the previous row;

continue in this way until the space is filled; the last row should be

worked into the braid, in order to keep the others in position.

Plate X. has the central portion enriched by a filling worked in

button-hole in blue flax thread. It is commenced from the centre; the

lines of the pattern are then followed towards the outer edges (see

description on p. 112). Plate XI. shows a similar filling, in the

flower at the corner, which is also worked in colour and finished on

the inner row of button-holing by a line of back stitch.

[Illustration: FIG. 12A.]

=A Diapered Border= (=Fig. 12a=).--Quite an interesting solid diapered

background may be obtained by working these stitches in rows, in groups

of three or five. The clusters are worked closely at the top; the

second row has the apex of each cluster fitting into the base of the

preceding one. A very pleasing border in contrasting colours may be

obtained in this way; the two firm lines of button-holing will, of

course, form the outer edges.

[Illustration: FIG. 12B.]

=Double Button-hole= (=Fig. 12b=).--Double button-holing has two rows

of button stitch (Fig. 12B). The first must have the stitches spaced

so as to allow of the second row of stitches dovetailing into those of

the first. This variety can be applied very successfully to braid or

galoons, in which cases the stitches need not reach to the opposite

side as in Fig. 12B.

=Leaves in Button-hole Stitch.=--A very good method of filling leaves

is to work them in two rows of button-holing, back to back, the firm

central line forming the mid-rib of the leaf and the rather broken

outer line suggesting the serration of the edges. Small flowers, flower

centres and berries are frequently worked in this way (Plate XIII.).

The heading of the stitch forms the outline. An old-fashioned, but

quaint variety of ground-filling to be seen on some of the earlier

samples consisted of successive rows of these little eyelet stitches.

The material was first pierced by a stiletto at regular intervals;

each hole was then button-holed or overcast round. The insertion of

the needle into a common centre formed an opening which gave a lighter

effect to the background.

[Illustration: FIG. 13.]

=Decorative Back Stitch= (=Fig. 13=).--This figure is simply back

stitch. To be effective and to make room for the interlacing thread,

it should be worked rather larger than usual, and with a thicker

thread, from one-eighth to a quarter of an inch in length. A thread of

a contrasting tone is then laced through, eye of the needle foremost,

the loops of each stitch being regulated before passing on to the next.

Back stitch was greatly in use in the seventeenth and early eighteenth

centuries, for the adornment of all sorts of articles. Quilts,

hangings, and personal clothing were ornamented in this way with bands

and patterns. These were sometimes produced by chain stitch worked on

the wrong side of the material, which, as an embroideress knows, forms

a row of back stitching on the reverse side--the right side in this

case.

=Reversible Back Stitch.=--Sometimes these patterns were worked in

reversible back stitch, in order to make both sides of the stitching

alike, for in those days needleworkers did not grudge either the time

or the patience spent on their embroideries.

Reversible back stitch, so-called, is a running or darning stitch.

All should be regular and equal in length, or the appearance of the

work, when finished, will not resemble back stitch. The “back” stitch

is formed by going over the line a second time with a running stitch,

which fills up the spaces on both sides of the material and renders it

reversible.

[Illustration: FIG. 14.]

=Honeycomb Filling= (=Fig. 14=).--This pattern has an advantage over

some of the more elaborate background stitches; it is easily and

quickly worked, and most of the thread is on the surface. It is known

to some needlewomen as honeycomb stitch, to others as Mexican stitch.

=To work Honeycomb or Mexican Stitch.=--To obtain the best result

work the small foundation stitches in one tone and the interlacing

in another. If worked on a material where the warp and weft threads

are distinct the small stitches may be kept quite regular without

difficulty, otherwise it is better to mark their position by means of a

ruler and pencil. The spacing will vary according to the material and

the thread used; about half an inch should be left between each small

stitch for bold effective work, and the second row should alternate

with the first. When all are in position, a long thread is taken for

the interlacing, which is done in rows. Fasten the thread at the right

top corner, and, eye of needle foremost, pass through the first stitch

in the top row, down to the second, up to the top row again, and so on,

as shown in Fig. 14. As the edges are undefined, this stitch requires a

good firm outline round it.

=Table Runner= (Plate V.) of cream cotton canvas, or netting, is of a

very open texture; it is treated in a simple direct manner, which is

both pleasing to the eye and interesting to the worker.

It may be made of half-a-yard of material, 54 inches by 18 inches. The

pattern is worked in wools and thick cottons, in stitchery eminently

suited to the loosely-woven texture.

_Method of working_:--Turn over on to the front surface a single fold

of about 1 inch on each side and tack in place to prevent fraying;

later on these raw edges will be covered with galoon or braid. Allow

about 12 inches at each end for the wide hem, and from there about

14 inches for the needle-weaving. Get the centre line by means of a

measuring tape; cut ten warp threads at each end of the bar, which in

this material is about three-quarters of an inch. Great care must be

taken in cutting the top threads to see that they correspond exactly

with those already cut. It is a good plan to draw the two outer threads

a little, the tightening of which will indicate the exact place to

cut the upper ones. This bar should be worked before the adjacent

bars are cut. Leave a strip of material about half an inch wide on

either side, then proceed to cut the weft threads, as before, for the

broader bands--each is about one-and-three-quarter inches wide, so that

twenty-four threads are withdrawn.

[Illustration: PLATE V.

A BUREAU SCARF.]

In weaving these wide strips, a frame is of assistance on account of

the very soft nature of the material: the pattern should be easily

followed from the illustration, but perhaps a few suggestions might

help the beginner. Fig. 31 gives the method of weaving. Start with

cream cotton or flax; run a few stitches on the under side; bring the

needle to the point and weave, by passing over three of the double

warp threads and under three, backwards and forwards, until these

upright threads are completely covered--it is necessary during this

process to press down the threads closely from time to time, and care

must be taken not to tighten the groups too much or the material will

get puckered. Repeat these woven bars in different groups of colour

to the end of the strip, which gives five groups in cream flax and

three in colour, jade green, reddish-purple, royal blue. Cover the

half-inch bands of material with a herring-bone or oriental stitch,

worked in cream linen floss embroidery thread. Take up the strands in

groups of three on either side--this separates the threads into groups

and simplifies the weaving of the next strip. Proceed now with the

more elaborate weaving. It will be noticed that the weaving moves in

a step-like manner, and that the pattern changes three times in each

ascending or descending line, so that each line from edge to edge is

divided into threads. Begin with the green group and pass under and

over four groups of thread (in Plate V. the group worked in purple is

the most distinct). Each group, as before, consists of three double

warp strands; weave one-third of the space, then leave out the fourth

group; continue to weave on three groups for another third of the

space; leave out the third group; finish with two groups. Overcast one

stitch into the canvas and weave over two fresh groups downwards for

one-third of the distance, then over the next two groups of the second

third; then take up the two next groups and weave to the edge of the

threads--thus weaving diagonally in groups of two from the bottom of

the bar, this last row produces a series of steps. Repeat the same in

ascending groups; finish exactly in the same manner as before, with the

exception that the weaving over four groups is this time at the top of

the bar--these masses of weaving are separated by plain bars of cream,

woven over four groups. The cut threads at the top are button-holed

to keep them secure. Lines of darning stitches connect the edges with

the woven bars. The bands of galoon are now laid over the turned-over

folds, hemstitched on the one side and button-holed on the other, with

dull blue; a line of tacking stitch in cerise gives a touch of bright

colour to the outer edge.

Turn up about 6 inches at each end to give weight to the hems; fill

the central parts with darning stitches worked in rows--it is best

to mark off the central unworked space with lines before beginning

this darning; this serves as a guide and prevents the stitching from

encroaching on the space.

The galoon on either side is attached with button-holing and French

knots--the spaces being filled with laid threads in cream, couched in

the same colour. Latchet darns give emphasis and connect the green

bars. Finally, the band of green is placed over the hem to finish it.

The edges of the galoon are button-holed with blue to correspond with

the rest of the runner.

Latchet darns are bands of weaving; the upright threads are laid, not

too closely, to represent the warp threads, then the weft threads are

woven in backwards and forwards; the edges are kept free exactly as

in the other woven bars. These latchet darns make an excellent finish

either to a bag, where they serve to hold the drawing-up cords, or to a

dress, where they ornament or keep the belt in position.

All strands withdrawn, when of a useful length, should be carefully

kept. They can be used in many different ways to make cords, tassels,

or fringes.

An embroidery book · 第 6 / 9 章