Now, change to the directory containing the disk images.
D:\>CD
\DISTS\SLINK\MAIN\DISKS-I386\2.1.8-1999-02-22
If you get an error, double-check what you’re typing. If the error
persists, manually issue CD \DISTS\SLINK\MAIN\DISKS-I386, then run
DIR, and then CD into the directory indicated. Note that the above
commands, and some other examples below, may appear as a single line
on your display even if they are wrapped here.
Now, you’re ready to create the first of two disks. Start the
program to write them out, rawrite2:
D:\DISTS\SLINK\MAIN\DISKS-I386\
2.1.8-1999-02-22>rawrite2
RaWrite 2.0 - Write disk file to
raw floppy diskette
Rawrite2 starts and displays its welcome message. Next, it asks for
the filename and diskette drive. You tell it to write resc1440.bin
to a:
Enter disk image source file name: resc1440.bin
Enter target diskette drive: a:
Rawrite2 now asks you to insert a disk into the floppy drive. Do so
and press Enter.
Plese insert a formatted diskette into
drive A: and press -ENTER- :
At this point, rawrite2 will create the first of the two disks. Now,
you need to repeat the process for the second disk:
D:\DISTS\SLINK\MAIN\DISKS-I386\
2.1.8-1999-02-22>rawrite2
RaWrite 2.0 - Write disk file to
raw floppy diskette
Enter disk image source file name: drv1440.bin
Enter target diskette drive: a:
Please insert a formatted diskette into
drive A: and press -ENTER- :
By now, your disks are created. You can now use the first one to
boot.