The side seams of the case must still be stitched together. This is done
on the outside of the case.
[Illustration: {Case with side seams}]
Place your shears case under the presser foot so that the cut edges are
even with the outside of the narrow toe. Start stitching in the hem of
section A.
[Illustration: Watch your presser foot when you sew!]
When you reach each corner remember to turn your wheel by _hand_ so the
needle goes into the material at the exact turning point. Turn corner as
you learned on page 16. Do not try to use the electricity when reaching
or turning corners until you know how to use the machine as easily and
as accurately as your mother or leader.
After you have stitched around the entire case, sew over the first
stitches you made in the hem.
Clip the threads short. (Are you remembering to put the clipped threads
into the paper bag fastened to your machine?)