Adjust the stitch regulator to 8 stitches per inch. Lower the needle on
the stitched hemline of section A. Lower the presser foot after the
threads have been drawn between the toes to the back of the machine.
Backstitch until the needle pierces folded edge, or knot the thread
according to directions on page 21. Then adjust the stitch regulator to
forward motion.
Stitch following the line you have marked, stitching on it as much as
possible. Apply little pressure onto the knee lever or foot pedal so the
machine will not move too fast.
When you reach the point of the pocket, lower the needle into the point
of material, raise the presser foot, turn the material around, lower the
presser foot again, and stitch to the next point. The presser foot needs
to be raised and lowered in this manner each time you want to turn a
corner.
[Illustration: {Presser foot}]
Stitch to the fold of the hem. When you reach the fold, backstitch to
the stitching line of the hem.
With your small scissors clip the threads close to the stitching line.