CHAPTER VII.

No. 1.

SINGLE STRAP TRACK HARNESS.

BRIDLE.

Length, Width,

inches. inches.

Crown 23 1

Cheeks 27 ½

Throat latch 30 ½

Front 21 ⅝

Winker strap 12 1

Split 7 ⅜

Billet 5 ½

Half Kemble Jackson check 25 1

Split 12 ½

Gag rein 24 ⅝

Center piece 60 ⅝

Billets 10

SADDLE.

Tree 3

Flaps 21½ 2½

Swell 2¾

Points 9 ⅞

Jockeys 4½ 2⅝

Belly band 18 1¾

Chapes 7 ⅞

Shaft girth 29 2

Billets 22 ⅞

Back-bands 20 ⅞

Shaft tugs 18 ⅞

Safety strap 45 1

Martingale, body 32 1⅜

Bottom lay 11 ⅝

Ring piece, round 17 ⁷/₁₆

BREAST-COLLAR.

Body 35 2

Neck piece 38 1¼

Ends ⅝

Chapes 7 ⅝

Traces 83 1

Lap, on breast collar 11

BREECHING.

Body 38 2

Layers 13 1⅛

Hip strap 43 ⅝

Tugs, round 11 ⅞

Chapes 7 ⅝

Turnback 44 1¼, ⅝

Body 1¼

Dock 14 3½

Reins 72 ⅞

Hand parts 84 1¼

No. 2.

SINGLE ROAD HARNESS—ONE-INCH TRACE.

BRIDLE.

Length, Width,

inches. inches.

Crown layer 23 ⅝

Cheek pieces 27 ½

Winker strap 12 1

Billet 5 ½

Split, flat 7 ⅜

Winkers 4½ 4

Front 21 ⅝

Throat latch 30 ½

Gag reins 24 ¾

Center piece 60 ½

Billets 10 ½

BREAST-COLLAR.

Layer and trace in one 89 1

Neck piece 48 ⅝

SADDLE.

Tree 2½

Flaps 21½ 1¾

Swell 2

Jockeys 3¾ 1⅝

Points 12 ¾

Back-bands 20 ⅞

Shaft tugs 19 ⅞

Belly band 22 ¾

Shaft girth 28 ¾

Billets 22 ¾

Martingale 41 ¾

Bottom lay 19 ¾

BREECHING.

Breeching layer 45 ¾

Hip strap 45 ⅜

Breeching tugs, round 11 ⅞

Buckle chapes 7 ⅜

Breeching straps 48 ¾

Turnback 44 ⅝

Dock 15 3

Reins, flat 72 ⅞

Hand parts 84 1¼

FOLDS.

Crown 11 2¾

Breast collar 39 3¾

Neck strap 26 2¾

Belly band 16 3

Shaft girth 28 3

Martingale 32 2¾

Breeching 36 3½

No. 3.

SINGLE HARNESS (BREAST COLLAR).

BRIDLE.

Length, Width,

inches. inches.

Crown piece 23 1⅛

Billets 6

Cheeks 29 ½

Throat latch 28 ½

Front, made up 12 ⅝

Winkers 4½ 4¾

Winker brace 13 1

Billet 5½ ½

Split, round 7½

Checks 23 ¾

Billets 9 ¾

Center piece 60 ⅝

BREAST-COLLAR.

Body layer 44 ⅞

at ends 1

Neck straps 40 ¾

at ends ⅝

Tugs 7 ⅝

Traces 78 1

GIG SADDLE.

Tree 3

Flaps 21½ 2¾

Points 9 ¾

Jockeys 3¾ 2⅝

Back-bands 21 1

Shaft tugs 21 1

Belly band 22 ¾

Shaft girth 28 ¾

Billets 20 ¾

Martingale 42 1

Bottom 19 ¾

BREECHING.

Body layer 46 ⅞

Hip strap 44 ½

Breeching tugs, round 11 ⅞

Buckle chapes 7 ½

Breeching straps 48 1

Turnback 44 ⅝

Body 1¼

Split 8 ⅜

Crupper dock 17½ 3

FOLDS.

Breast collar 36 3

Neck piece 24 2¾

Breeching body 37 3

Belly band 17 2¾

Shaft girth 28 2¾

Martingale 3 2½

No. 4.

SINGLE HARNESS (HAME COLLAR).

BRIDLE.

Length, Width,

inches. inches.

Crown piece 23 ⅞

Split 6 ⅝

Cheeks 27 ⅝

Throat latch 28 ⅝

Front 21 ¾

Winker strap 12 1⅛

Billet 5 ⅝

Split, rounded 7

Check reins 23 ¾

Billets 8½ ¾

Center piece 60 ⅝

HAMES, ETC.

Hame tugs 13 1⅛

Hame straps, short 17 ⅝

long 20 ⅝

Traces 80 1⅛

GIG SADDLE.

Tree 3½

Flaps 20 3½

Points 14 ⅞

Back straps 20 1

Shaft tugs 20 1

Belly band 22 ⅞

Shaft girth 30 ⅞

Billets 22 ⅞

Martingale 35 ⅞

Bottom lay 19 ⅞

Ring piece 20 1¼

Split 16

BREECHING.

Body 44 1

Breeching straps 49 1

Tugs 12 ¾

Hip strap 44 ¾

Turnback 44 ¾

at hip 1½

Crupper 18 3

FOLDS.

Crown 12 2½

Belly band 17 3

Shaft girth 28 3

Martingale 33 3

Breeching 37 3½

No. 5.

HEAVY COUPÉ HARNESS.

BRIDLE.

Length, Width,

inches. inches.

Crown 23 1⅜

Layer, cut to pattern 9 1½

Cheeks 30 ⅝

Front 22 1¼

Winker straps 13 1½

Billets 5 ⅝

Split 8½ ½

Winkers 6 5½

Nose piece 30 1¼

Ends at cheeks ⅝

Throat latch 24 ⅝

Round check 28 ⅞

Billets 10

Center check 72 ⅝

SADDLE.

Tree 4

Flap 22 3¾

Swell 4

Point 12 1

Jockey 5 3½

Back-band (running) 46 1¼

Shaft tugs 24 1⅜

Belly band 26 1¼

Shaft girth 30 1

Billets 23 1

Martingale 34 1

Bottom lay 21 ⅞

HAMES, TRACES.

Hames, 4 pounds ¾

Hame tug, made up 10½ 1¼

Safes, full length 2½

Loops 4½

Traces 72 1¼

BREECHING.

Body layer 52 1¼

Hip straps 48

Center 1¼

Swell 2

Split 16 ¾

Tugs 11 ¾

Breeching strap 50 ⅞

Turnback 60 ⅞

Body 20 1¾

Split 9 ¾

Dock 19 3½

Kidney strap 34 1

Ornament 3½ 2

FOLDS.

Breeching 46 3¾

Belly band 17 3½

Shaft girth 19 3½

No. 6.

DOUBLE ROAD HARNESS, WITHOUT BREECHING.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 23 1

Layer, waved 7 ⅝

Cheeks 29 ½

Gag runners 8 ½

Throat latches 26 ⅜

Winker straps 12 1½

Split 8 ⅜

Billets ½

Winkers 5¼ 4¾

Fronts 30 ⅝

Checks 23 ¾

Center parts 60 ½

Billets 10

HAMES AND TRACES.

Hames ⁹/₁₆

Hame straps 24 ⅝

Hame tugs 1

Safes 13 1½

Loops 4¾

Ends 5½

Traces 80 1

Spread straps 18 ½

Link

PADS.

Top 17 1⅜

Sides 18 1¼

Points 8 ¾

Trace bearers 16 1

Housings 24 2¾

Belly bands 23 ⅞

Turnback 44 ⅝

Body 1⅜

Split 9 ⅜

Docks 14 3

Standing martingales 64 ¾

Chin parts 12 ½

Short reins, rounded 55 1⅛

Long reins, rounded 72 1⅛

Hand parts 102 1¼

BREAST COLLARS FOR PATENT YOKE.

Body layers 40 1

Loops 4¾ 1

Neck straps 43 1⅛

Split, long ends 17½ ½

short ends 14½ ½

Tugs, short 2¼ ½

Tugs, long 2¾ ½

Billets on yokes 6 ⅞

Yoke straps 11 1⅛

Martingale 20 1

Billets 12 ¾

Safety straps 36 ⅝

FOLDS.

Belly bands 17 3½

Breast collars 41 4

Neck straps 8 4

Martingales 32 3½

No. 7.

SHORT TUG COACH HARNESS, WITHOUT BREECHING.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 22 1⅜

Cheeks 28 ⅝

Fronts, made up 13 1⅛

Throat latch 23 ⅝

Winker brace 13 1¼

Split, flat 8 ⅜

Billet ends ⅝

Gag runners 8 ⅝

Winkers 5¾ 5¼

Cheek loops 7¼

Check reins 22 ¹³/₁₆

Center pieces 60 ⅝

PADS.

Tops 17

At bilge 2¼

Center 1⅜

Side pieces 26 1¾

Trace bearers 16 1¼

Lining 13 1⅜

Point 10 ⅞

Belly bands 24 ⅞

Martingales 28 ¾

Bottoms 16 ⅝

Billets 13 ¾

Standing martingales 60 ¾

Mouth pieces 17 ¾

Turnbacks 44 ⅞

At docks 1¾

Split 9 ½

Hip straps 66 ¾

Dock 18 2½

HAMES AND TRACES.

Hames ⅝

Hame tugs 16 1¼

Bottoms 13 2½

Loops 4⅝

Hame straps 28 ⅝

Traces 81 1¼

Spread straps 16 ⅝

FOLDS.

Belly bands 16 3½

Martingales 30 3½

No. 8.

LONG TUG COACH HARNESS.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 23 1⅜

Layers 9

Cheeks 29 ¾

Face pieces 12 ¾

Ornaments 4¼ 2

Nose pieces 14 1¼

Ends ⅞

Throat latches 26 ⅝

Winkers 6⅛ 5¼

Checks for swivel 30 ⅞

Plain 23 ⅞

Crown piece billets 8 ¾

Center check[1] 60 ¾

HAMES AND TRACES.

Hames ¾

Hame tugs, made up 16½ 1¼

Safe 2½

Loops 8

Traces 84 1¼

PADS.

Top 16½

Center 1¾

Swell 2¾

Housings 21½

Center 3½

Swell 5

Pad sides 26 1⅞

Points 10 1

Market straps 20 1

Swell 1½

Market tugs 20 1

Loops 4½

Belly band, short 23½ ⅞

long 35

Martingales 27 ⅞

Spread straps 18 ⅝

Hame straps 28 ¾

BREECHINGS.

Layers 53 1¼

Tugs 13 ¾

Loops 4

Hip straps 27

Centers 1½

Ornaments 2¼

Split 19 ¾

Turnbacks 32½ ¾

Bodies 19 2

Layers 12 ¾

Crupper billets 8 ⅝

Docks 17½ 3½

Short reins 84 1⅓

Rounded 55

Long reins 84 1⅛

Rounded 72

Hand parts 108 1¼

FOLDS.

Belly band, short 17 3¾

long 20

Martingales 32 3½

Breechings 48 4

[1] Other straps same as in No. 7.

No. 9.

ENGLISH FOUR-IN-HAND HARNESS.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 23 1¾

Chapes 2 ¾

Cheeks 10½ ¾

Billets 16 ¾

Throat latches 27 ¾

Nose bands, middle 12½ 1¼

Buckle-ends 13 ¾

Winker straps 14 1½

Split 8½

Face pieces 13

Fronts 13 1⅜

Winkers, square 6½ 6½

Bearing reins 66 ¾

Round reins 20½ 1⅛

Running bradoons 26 1⅛

Billets 9 ¾

PADS, ETC.

Tops 17

Bottoms 21½ 2½

Point straps 8 1⅛

Girths 42 2½

Girth pieces 15 2½

Girth straps 16 1⅛

Tug belly bands 52 1⅛

BREECHINGS, ETC.

Bodies 120 1½

Hip straps 48 1⅛

Breeching tugs 13 1½

Trace bearers 18 1⅛

Turnbacks 45 1⅛

Layers 14

Linings 59 1⅛

Cruppers 22 1⅛

Docks 16 3

TRACES, ETC.

Traces, made up 78 1½

Draw leathers 8 1½

Hame tugs 19½ 1½

Safes 22 3

At hame end 2

Short tugs 10 1⅛

Tug straps 18 ¾

Bearing martingales 54 1¼

Short martingales 42 1¼

Leader traces, made up 60 1⅛

Hame tugs 18 1⅛

Safes 20½

All other leader strapping,

narrower than wheelers ⅛

REINS.

Wheeler 13 feet 1⅛

Couplings 9 ” 1⅛

Billets 1 foot 1⅛

Hand parts 6 feet 1⅛

Leader reins 22 ” 1⅛

No. 10.

TANDEM HARNESS.—LEAD-HORSE.

BRIDLE.

Length, Width,

inches. inches.

Crown piece 23 1¼

Layer 7

Cheeks 29 ⅝

Throat strap 26 ½

Winker strap 12 1½

Split 8

Winker 5 5½

Check for swivel 28 ¾

Billets 9 ¾

Front, made up 13 ⅞

Center check 60 ⅝

Reins 175 ⅞

PAD AND LONG TUGS.

Top 17 1⅜

Housing 24 3¾

Sides 17 1½

Points 12 ¾

Market tug chapes 20 ⅞

Market tug billets 20 ⅞

Belly band, fold 17 3½

Layer 23 ⅞

Turnback 44 ⅝

Body 1½

Split 8

Dock 12 3

Hame tugs 16½ 1⅛

Traces 90 1⅛

Trace bearers 56

GIG SADDLE AND SHORT TUGS.

Tree 4

Flaps 22 3½

Points 10 ⅞

Trace bearers 17 1

Hame tugs 13 1⅛

Traces 92 1⅛

SHAFT-HORSE.

Bridle cut ⅛ of an inch heavier than

that for lead-horse, the lengths

being the same throughout.

SADDLE.

Tree 5

Flaps 23 4¼

At swell 5¾

Points 10 1⅛

All other parts cut to the same

measurements as those of the

Coupé harness, No. 5.

No. 11.

MEDIUM WEIGHT SINGLE EXPRESS HARNESS.

BRIDLE.

Length, Width

inches. inches.

Crown piece 24 1½

Cheeks 30 ¾

Throat latch 22 ¾

Front 22 ⅞

Winker brace 13 1¼

Split 8

Rounded 7

Gag runners 16 ⅜

Face pieces 26 1¼

Split 10

Check reins 22 1

Billets 10 ¾

Center 60 ⅝

Winkers, square 5

GIG SADDLE.

Tree 5

Skirts, width to suit tree 22

Points 12 1¼

Belly band, fold 18 5

Shaft girth, fold 22 5

Chapes 7 1¼

Shaft tugs 20 1¼

Billets 14 1¼

Carriers for saddle 20 1¼

Hame tugs 20 1½

Hame straps 20 ⅞

Traces 74 1½

BREECHING.

Body fold 38 5

Layer 46 1½

Breeching straps 48 1¼

Tugs 12 1

Hip strap 44 2

Split 20

Carrying straps 22 ¾

Turnback 44 1

Layer 9

Crupper body 18 1½

Split 8

Crupper dock 15 2½

No. 12.

HEAVY SINGLE EXPRESS HARNESS.

BRIDLE.

Length, Width,

inches. inches.

Crown piece 22 1¼

Cheeks 29 ¾

Throat latch 25 ¾

Front 30 1

Made up 12

Winker strap 12½ 1¼

Split 7½

Billet 5 ⅝

Nose piece 13 ⅞

Checks 23 ⅞

Center piece 60 ⅝

Winkers 5½ 5

HAMES AND TRACES.

Hames ⅞

Hame tugs 11 1⅞

Loops 4

Traces 72 1⅞

Hame strap, long 23 1

short 17 1

SADDLE.

Tree 6

Flaps 22 5½

Jockies 6 5¼

Points 10 1¼

Back straps 22 1½

Shaft tugs 26 1½

Billets 14 1¼

Chapes, long belly band 8 1¼

short belly band 8 1¼

Martingale 29 1¼

Billet 14 1

BREECHING.

Layer 48 1½

Tugs 9 1

Hip straps 48 1

Turnback 46 1¼

Dock 16 3

Breeching straps 58 1¼

Reins 1

FOLDS.

Breeching 41 5

Belly band, short 17 4½

long 22 4½

Martingale 32 4½

Turnback 22 2¼

No. 13.

LONG TUG TEAM HARNESS, SOFT PAD.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 24 1⅝

Split 7

Cheek billets ⅞

Throat latch billets ¾

Cheeks 30 ⅞

Fronts 24 ⅞

fitted up 16½

Winker straps 15 1½

rounded 9

Face pieces 22 1⅛

Split 11

Throat latches 24 ¾

Winkers 5⅞ 5½

Inside checks 60 ¾

Outside checks 26 ¾

Billets 10 ¾

PADS, ETC.

Tops 22 1¾

Ends 1½

Ring pieces 26 1¼

Center rounded 5

Nut pieces 18 1¾

Skirt straps 32 1¼

Back strap 60 1¾

Split 52

Chapes 9 1¾

Layers 12 1¼

BREECHING.

Folds 44 5

Layers 54 1¼

Chapes for lead up 6½

Layers 11 ⅞

Side straps 68 1

Lazy straps 44 1

TRACES, ETC.

Traces, fitted up 72 1¾

Hame tugs, fitted up 18 1¾

Billets 16 1½

Belly band folds 18 5½

Chapes 7 1½

Pole straps 54 1¾

Breast straps 66 1¾

Collar straps 32 1

Hame straps, bottom 26 1

top 28 1

No. 14.

LONG TUG FARM HARNESS.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 24 1¼

Ends split 7½ ⅝

Cheeks 17 ⅝

Bit straps 11½ ⅝

Throat latches, long 13 ⅝

short 11 ⅝

Winker straps 13 1¼

Split, flat 8 ½

round 8 ⅝

Billet 5 ⅝

Fronts 12 1¼

Face pieces 22 1

Split 10

rounded 7

Checks 24 ⅞

rounded 15

Center 60 ⅝

Billets 8⅞

PADS, TRACES, ETC.

Pad tops, soft pad 36 1¼

Layers 50 1⅞

Billets 16 1¼

Belly band fold 21 5

Billets 14 1¼

Hame tugs 17 1½

Traces 72 1½

Hame straps, long 22 1

short 20 1

Holdbacks 52 1½

Breast straps 52 1½

Turnbacks 36 1

Crupper bodies 17 1¼

Docks 14 3

Billets ⅝

Lines ⅞

Billets 9 ⅞

No. 15.

WAGON HARNESS WITH ADJUSTABLE TREES.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 24 1⅝

Split at ends 6 ⅞ and ¾

Cheeks 30 ⅞

Throat latches, long 20 ¾

short 12 ¾

Fronts 22 ⅞

Round reins 22 1

rounded 16

Center pieces 60 ¾

Winker brace 11 1

Winker, wing pattern 7 4

PADS, ETC.

Hame tugs 36 1½

With cockeyes and chains 76

Adjustable trees, No. 6.

Pad skirt 16 3½

Layer, also to line 20 1¼

billets

Billets 16 1¼

Bottoms 18 6

Belly band folds 18 5

Chapes 7 1¼

Billets 16 1¼

BREECHING.

Body folds 39 5

Layers 48 1¼

Tugs 12 ⅞

Side straps 72 ⅞

Hip straps 26 1¾

Split 20

Crupper body 16 1½

Split 8

Dock, folded 14 2½

Back straps, 42 1

to sew in rump rings

Breast straps 56 1½

Holdbacks 50 1¼

Hame and carrying straps 22 ⅞

TRIMMINGS.

2 pairs common low top wooden hames,

2 bits,

4 1½-inch cockeyes,

6 1¾-inch breeching rings,

4 1-inch ” ”

4 ⅞-inch ” ”

12 1¼-inch buckles,

2 1½-inch ”

20 ⅞-inch ”

16 ¾-inch ”

4 1½-inch trace buckles,

4 gag-swivels.

No. 16.

ADJUSTABLE PAD DOUBLE HARNESS, TO BE USED ALSO AS SINGLE HARNESS.

BRIDLES.

Length, Width,

inches. inches.

Crown piece 24 1¼

Split 7½ ⅝

Cheek pieces 16 ⅝

Bit straps 10 ⅝

Fronts 22 1

Throat straps 20 ⅝

Face pieces 23 1

Split 10½

Winker braces 13 1

Split, rounded 7

Winkers 4¾ 4¼

Check reins 22 ⅞

Center pieces 56 ⅝

ADJUSTABLE PADS.

Skirts 20

Points 14 1

Pads 6

Back-bands 38 1

TRACES, ETC.

Traces 78 1½

Hame tugs 10 1½

Belly bands, folded 19 3¾

Chapes 6 1

Martingales, folded 30 3

Billets, collar 16 ⅞

Points 10 ⅝

Pole straps 48 1¼

Yoke straps 48 1¼

BREECHINGS.

Body fold 39 3¾

Layers 45 1⅛

Tugs, long 12 ⅝

short 10 ⅝

Hip straps 26 ⅝

Back straps 36 ⅞

Reins 78 ⅞

TRIMMINGS.

2 pair low top wood hames,

2 adjustable trees,

4 1½-inch trace buckles,

4 1¼-inch roller buckles—for breast and neck-straps,

14 1-inch buckles,

6 ⅞-inch ”

24 ⅝-inch ”

4 breeching rings,

8 ¾-inch rings.

No. 17.

PENNSYLVANIA WAGON HARNESS.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 22 1¼

Cheek pieces, long billet side 48 1¼

short billet side 36 1¼

Throat latch 39 ¾

Nose band 18 1⅛

Winker straps 12 1¼

Split 9

Front 26 1⅛

Winkers 5½ 5

Check reins 78 1

Bit straps 12 ⅞

BREECHING.

Butt pieces 56 4

Hip pieces 58 4

Cross pieces 62 1½

Side straps 54 1½

Braces 24 3

Hip straps 36 1½

Back-band 46 4

Chapes 14 3

Short-top stay 8 1¼

Back strap 66 3

Split 8

Chapes, for square on rump 8 2

Dock, folded 15 2½

Belly band, long side 34 1½

Billet 24 1½

Carrying straps 22 ⅞

Hame straps 22 ⅞

Chain pipes 30 5

TRIMMINGS.

2 pair hook hames, high top,

4 trace chains,

4 large rings, or D’s, for breeching,

2 bits,

2 1½-inch buckles—breast strap,

2 triangles for rump,

6 1½-inch buckles,

2 1¼-inch ”

16 ⅞-inch ”

2 1-inch ”

4 ¾-inch ”

No. 18.

STAGE HARNESS.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 24 1½

Split 7

Cheeks 30 ¾

Throat latches 22 ¾

Winker straps 13 1¼

Split 8

Front 22 1⅛

Made up 12

Reins, in one piece 78 ¾

PADS, ETC.

Tops 36 1¾

Points cut down to 1¼

Tugs and belly band billets combined 30 1¼

Center piece 9 1

Belly band folds 20 5

Chapes 7 1¼

Traces 64 2

Stay loops, sewed in the trace 12 1¼

Breast straps 56 1½

Holdbacks 42 1¼

Billets 15 1¼

Collar straps 30 1

Chapes 6 1

Hame straps 22 ⅞

Carrying straps 22 ⅞

BREECHINGS.

Folds 39 5

Layers 48 1¼

Tugs 12 ⅞

Breeching straps 72 ⅞

Back straps, or turnbacks 56 1¼

Crupper bodies 16 1½

Split 8

Dock, folds 14 2½

Hip straps 30 1¾

Split 20

TRIMMINGS.

2 pairs high top Concord hames,

2 bridle bits,

2 pairs two-foot chains with D ends,

14 1¼-inch buckles,

2 1½-inch ”

16 ⅞inch ”

2 1-inch ”

20 ¾inch ”

6 1¾-inch breeching rings,

6 1¼-inch ”

4 1-inch ”

4 gag-swivels.

No. 19.

BITTING HARNESS.

BRIDLE.

Length, Width,

inches. inches.

Crown piece 24 2

Split 7

Cheeks 13 1¼

Billets 9 1¼

Throat latch 22 ¾

Front 24 1

Made up 12

Throat latch 22 ¾

Swivel strap 18 ⅝

Gag rein, long side 66 ⅞

rounded 16

short side 24 ⅞

rounded 16

Side reins 42 12

Billets 9

Martingale to buckle back 54 1¼

Split 15

Surcingle, web 63

padded 16

Billets on broad web 24 1

Chapes 6 1

Pad layer and billets 18 1

Side chapes 21 1

Turnback, sewed in rump ring 42 1

Crupper body 16 1½

Split 8

Dock 16 2⅛

TRIMMINGS.

1 bit,

2 martingale rings,

1 1¼-inch ring,

3 1⅛-inch rings,

5 1¼-inch buckles,

10 1-inch ”

3 ⅞-inch ”

5 ¾-inch ”

In making up, measure off 24 inches from the billet end of the web for

the center of the pad, which should be 16 inches long; sew on the chape

for the billet, and turn back the ring across the center of the pad;

measure off from the center 22 inches on each side for the side check,

chapes of ring, and buckles; buckle back the rump stay strap with a

reverse buckle and slip loops.

No. 20.

CART HARNESS.

BREECHING.

Length, Width,

inches. inches.

Body 75 4

Layer, to extend to ring 64 2½

Hip strap 54 1¼

Tugs 14 1¼

Kidney strap 58 1¼

Tugs 14 1¼

Back strap 34 1½

Safe-piece 14 4

Layer or buckle piece 14 1½

Belly band, long 60 2½

Billet 24 2½

Bridle same as stage harness, No. 18.

TRIMMINGS.

1 saddle tree,

1 pair hook hames,

1 back chain,

2 holdback chains,

2 trace chains,

2 loop end pins for breeching,

1 2½-inch ring for rump,

4 1⅛-inch rings,

6 1-inch buckles,

8 ¾-inch ”

1 2½-inch buckle,

1 1½-inch ”

1 1¼-inch ”

1 plain ring bit.

No. 21.

MULE HARNESS.

BRIDLES.

Length, Width,

inches. inches.

Crown pieces 24 1½

Split 7

Cheeks 30 ⅞

Throat latches 22 ¾

Winker straps 13 1¼

Split 8

Front 22 1⅛

Reins, in one piece 78 ¾

PADS.

Top 34 1¾

Belly band folds 18 5

Chapes 7 1¼

Hame tugs 32 1½

Breeching fold 34 5

Hip straps 24 1¾

Split 18

Side straps 62 ⅞

Turnback 52 1

No. 22.

SHORT TUG BUTT CHAIN HARNESS.

Length, Width,

inches. inches.

Hame tugs, to sew in side loops 36 1½

Short tugs for chains 52 1½

Pad fold 20 6

Layer, to include billet linings 48 1¼

Center lay for back strap 8 1

Bridle reins 78 ¾

All other parts the same as No. 16.

TRIMMINGS.

2 pairs of common high top hames,

2 common bits,

4 breeching loops for tugs,

2 pairs of butt chains,

6 1¾-inch breeching rings,

4 1-inch ” ”

4 ⅞-inch ” ”

12 1¼-inch buckles,

2 1½-inch ”

20 ⅞-inch ”

16 ¾-inch ”

4 1½-inch trace buckles.

TRIMMINGS FOR CARRIAGE-HARNESS.

No. 1.

Page 64.

2 1⅜ or 1½-inch terrets,

1 bolt-hook to match,

2 ⅞-inch shaft-tug buckles,

9 ½-inch buckles,

10 ⅝-inch ”

6 ⅞-inch roller-buckles,

2 gag-swivels,

2 1¼-inch breeching-rings,

2 1¼-inch martingale-rings,

1 half-cheek trotting-snaffle,

2 ⅝-inch rings,

4 saddle-nails.

No. 2.

Page 66.

2 1¼-inch terrets,

1 No. 4 bolt-hook,

1 No. 2 fly terret,

1 front,

2 rosettes,

2 ⅞-inch shaft-tug buckles,

2 gag-swivels,

2 1¼-inch breeching-rings,

2 1¼-inch martingale-rings,

4 ⅞-inch roller-buckles,

2 ⅞-inch rein-buckles,

8 ½-inch bridle-buckles,

3 ⅝-inch buckles,

5 ¾-inch roller-buckles,

2 ⅜-inch buckles,

2 ¾-inch rings,

1 half-cheek snaffle.

No. 3.

Page 68.

2 1⅜ or 1½ inch terrets,

1 bolt-hook to match,

2 1-inch trace-buckles,

2 1-inch shaft-tug buckles,

9 ½-inch buckles,

7 ¾-inch ”

5 ⅝-inch ”

2 ⅞-inch rein-buckles,

2 1-inch roller-buckles,

2 1¼-inch martingale-rings,

2 1¼-inch breeching-rings,

1 snaffle-bit,

2 gag-swivels,

2 ⅝-inch rings,

4 saddle-nails.

No. 4.

Page 70.

1 pair ¹¹/₁₆-inch hames,

2 1½ or 1⅝-inch terrets,

1 bolt-hook to match,

2 1⅛-inch trace-buckles,

2 1-inch shaft-tug buckles,

4 ⅞-inch roller-buckles,

3 ⅞-inch buckles,

5 ¾-inch ”

12 ⅝-inch ”

2 gag-swivels,

1 fly-terret,

2 1⅜-inch breeching-rings,

2 1⅜-inch martingale-rings,

2 rosettes,

1 snaffle-bit.

No. 5.

Page 72.

1 pair ¾-inch hames,

2 1⅝ or 1¾-inch terrets,

1 bolt-hook to match,

1 fly-terret to match,

2 1¼-inch trace-buckles,

2 1¼-inch shaft-tug buckles,

4 ⅞-inch roller-buckles,

2 1¼-inch ”

1 ⅞ inch buckle,

6 ¾-inch buckles,

11 ⅝-inch ”

1 Hanoverian or scroll bit,

2 rosettes,

1 chain or link front,

2 gag-runners (hooks and eyes),

2 1½-inch breeching rings,

2 ⅝-inch rings,

4 saddle-nails.

No. 6.

Page 74.

1 pair ⁹/₁₆-inch hames,

2 1¼ or 1⅜-inch terrets,

2 fly or post hooks to match,

2 fly-terrets,

4 1-inch trace-buckles,

8 pad-screws,

6 ¾-inch roller-buckles,

4 ⅝-inch ”

8 1-inch ”

2 ⅝-inch buckles,

2 ⅜-inch ”

24 ½-inch ”

4 ⅝-inch rings,

2 Hanoverian or snaffle bits,

2 hame-rings,

4 gag-runners.

No. 7.

Page 76.

1 pair ⅝-inch hames,

4 1⅝ or 1¾-inch terrets,

2 fly-hooks to match,

2 fly-terrets,

4 1¼-inch trace-buckles,

4 ⅞-inch roller-buckles,

4 ⅝-inch ”

2 ⅞-inch buckles,

4 ¾-inch ”

20 ⅝-inch ”

2 scroll or Hanoverian bits,

4 rosettes,

4 gag-runners,

2 hame-rings,

2 crupper-loops,

4 ⅝-inch rings,

8 pad-screws.

No. 8.

Page 78.

1 pair ¾-inch hames,

4 1⅝ or 1¾ inch terrets,

2 fly or post hooks,

2 fly-terrets,

4 1¼-inch center-bar loop trace-buckles,

4 1-inch tug-buckles,

8 ⅞-inch roller-buckles,

30 ¾-inch buckles,

8 ⅝-inch ”

4 ⅝-inch rings,

2 stiff scroll or Hanoverian bits,

2 Bradoon bits,

4 Bradoon swivels,

4 gag-swivels (hooks and links),

2 hame-rings,

12 pad-screws,

2 crupper-loops,

4 pad-loops.

Nos. 9 and 10.

Pages 80 and 82.

The trimmings for these harness are the same as for the regular sets

of double or single, with the exception of the ring-rosettes for the

bridles of the pole or shaft horses.

No. 11.

Page 84.

1 pair ⅞-inch hames,

2 1¾-inch terrets,

1 post or bolt hook to match,

1 fly-terret,

2 1½-inch trace-buckles,

2 1¼-inch shaft-tug buckles,

6 1¼-inch roller-buckles,

5 1-inch buckles,

1 ⅞-inch roller-buckle,

14 ¾-inch buckles,

1 plain ring-bit,

2 rosettes,

2 gag-runners,

2 1⅜-inch breeching-rings,

2 martingale-rings,

1 plain front,

2 ¾-inch rings,

4 saddle-nails.

No. 12.

Page 86.

1 pair ⅞-inch hames,

2 1⅞-inch terrets,

1 post or bolt hook,

1 fly-terret,

2 1⅞-inch trace-buckles,

2 1½-inch shaft-tug buckles,

6 1¼-inch roller-buckles,

4 1-inch buckles,

1 1-inch roller-buckle,

1 1¾-inch buckles,

1 ring-bit,

2 rosettes,

2 gag-runners,

2 1⅝-inch breeching-rings,

1 band-front,

4 saddle-nails.

The harness makers' illustrated manual · 第 7 / 26 章