22. =_Don’t_= fail to notice that the steam gauge is in order.

23. =_Don’t_= fail to keep an eye out for leaks and have them

repaired immediately, no matter how small.

24. =_Don’t_= fail to empty the boiler every week or two and re-fill

it with fresh water.

25. =_Don’t_= let any air into the furnace, except what goes through

the grate-bars, or the smoke burners, so called, by which the air is

highly heated.

26. =_Don’t_= increase the load on the safety-valve beyond the

pressure allowed by the inspector.

27. =_Don’t_= fail to open the doors of the furnace and start the

pump when the pressure is increased beyond the amount allowed, _but_

28. =_Don’t_= fail to draw the fires _when there is danger_ from the

water having fallen too low.

29. =_Don’t_= fail to check the fire—if too hot to draw, do it with

fresh coal, damp ashes, clinkers or soil; _and_

30. =_Don’t_= fail to open the doors of the furnace and close the

ash-pit doors at the time the fire is checked—_and_

31. =_Don’t_= decrease the steam pressure by feeding in water or

suddenly blowing off steam, _and_

32. =_Don’t_= touch the safety-valve, even if it be opened or closed,

_and_

33. =_Don’t_= change the feed apparatus if it is working, or the

throttle-valve be open; let them both remain as they are for a short

time, _and_

34. =_Don’t_= fail to change them very cautiously and slowly when you

close them, and

35. =_Don’t_= fail to be very cool and brave while resolute in

observing these last seven “Don’ts.”

Maxims and Instructions for the Boiler Room Useful to Engineers, Firemen & Mechanics; Relating to Steam Generators, Pumps, Appliances, Steam Heating, Practical Plumbing, etc. · 第 39 / 328 题