These are divided into 3 groups = 3 pairs at point 1 = put up a pin =
twisted linen passing = twist both pairs once = put up the pin at point
3 = add on 5 pairs at point 2 = put up the pin = go back through 3 pairs
= twist the 2 last pairs = linen passing = put up the pin at point 3 =
twist both pairs = linen passings, as seen in the illustration, to the
right and left as far as point 11 = at point 13 intervert 6 pairs by a
twisted linen passing = make a plait at point 14 = put up a pin in the
middle of the same = pass through 2 pairs of bobbins with twisted linen
passing = put 1 pair of bobbins aside at point 22 = put up a pin at the
2 first pairs at point 15 = work the leaf in lozenge stitch = put up a
pin at point 16 near the first pair = twist both pairs once = linen
passing = put up the pin at point 17 = go back in the same manner = work
on in the same way to point 21 = put up the pin at point 22 = twisted
linen passing to point 11 = tie up the first pair of the scallop with
the bobbins of point 11 = bring the last pair back and work as at point
1 = then repeat and proceed in the same way to point 27 = twist the 2
pairs up to point 26 = put up the pin = make one lozenge stitch and join
the plait, stitch to point 28 = continue the lozenge stitch to point 29
= join the bobbins of point 29 to those of point 21 by a plait = put up
the pin = linen passing = twist the two last pairs once = put up the pin
= linen passing = put up the pin at point 31 = twist both pairs once = 2
linen passings = put up the pin at point 82 = 2 linen passings = tie up
the bobbins of point 33 with those of point 29 = plait stitch = put up
the pin = join to point 34 with lozenge stitch = with the bobbins at
point 28 make lozenge stitch to point 27 = put up a pin = twist 3 pairs
once = make 2 linen passings = join with linen passing = continue the
scallop according to the preceding description, from point 27 to point
35.
At point 34 make a leaf in lozenge stitch = put up the pin = continue
from point 33 to point 36 with twisted linen passings = carry the first
pair of bobbins of the lozenge to point 35 by means of 2 twisted linen
passings = put up a pin in the middle of the 2 pairs = make a plait to
point 37 = cross the pairs again as at point 13, in the beginning.
PILLOW LACE (figs. 807 and 808).—Worked with 30 pairs of
bobbins.—These are divided: 14 pairs at point 1 = put up a pin on the
left and right = with the last pairs make plaits to point 12 = add 2
pairs = make a double passing as for a plait = put up a pin in the
middle of the pairs = plait with 2 pairs of bobbins to point 3 = add 2
pairs of bobbins = make a double passing as for the plait = put up a pin
in the middle of the pairs = then go on in the same manner to point 4 =
add 4 pairs of bobbins = put up the pin = at point 5, add 2 pairs of
bobbins = make a plait = put up a pin and join to point 4 by a double
passing.
[Illustration: FIG. 807. PATTERN FOR PILLOW LACE FIG. 808.]
[Illustration: FIG. 808. PILLOW LACE.