Oil pumps today are much better and stronger than the first pumps ever
built, but they are direct descendants of the ones that were invented
for use in English coal mines long ago. In fact, those early pumps were
the great-granddaddies of all modern machines.
[Illustration]
[Illustration]
Coal miners in England had dug so far beneath the surface of the earth
that the shafts and tunnels were in danger of filling up with water.
Neither manpower nor the power of horses hitched to pumps could do the
tremendous job of keeping the mines dry. Something much stronger was
needed. In order to find a new kind of power, inventors began
experimenting with steam. The first workable steam engines were made to
pump out coal mines more than two hundred years ago.
After a while steam engines began to pull trains over rails and drive
ships through the water. They ran threshing machines on farms. Then
inventors used their new knowledge about power to make other kinds of
engines driven by gasoline or electricity or oil.
[Illustration]
At last some of this new machinery began to work its way back into the
mines. Power driven elevators carried the men up and down shafts to
their work. But the miners still did all the coal digging and loading
by hand.
Today many miners use power-driven drills for digging. Mechanical
loaders pick up the loose coal and put it into small cars on the tracks
in the tunnel. A little electric locomotive pulls the cars away to the
elevator which hoists them up above ground.
The most remarkable digger of all is the one you’ll see on the next
page. It rolls along a track deep underground until it comes to the
place where its operator wants to cut coal. He pushes a control, and the
machine’s long neck reaches up. The cutting head, at the end of the
neck, starts biting into the coal. The head does its work much faster
and easier than men with hand tools ever could.
[Illustration]
Outside the mine, machines sort the coal according to size and load it
into railroad cars.
[Illustration]
Unloading machinery empties the cars in many places, too. There’s one
coal yard where a woman, pushing buttons, controls machines that do
everything--unload cars, store the coal according to its size in tall
bins, and load the trucks that will deliver it to customers. This is how
the yard works:
Each railroad car empties its coal in a stream onto a moving belt. The
belt carries the coal to a machine called a giraffe, which works like an
escalator. The giraffe lifts the coal into a tall hopper.
[Illustration]
The woman who runs the coal yard sits in an office with a big window,
where she can look out and see everything that’s going on. When a truck
has backed up to a hopper, ready to load, she pushes a button. Coal
drops down out of the hopper onto another giraffe which lifts it into
the body of the truck. As soon as the truck is filled, push goes a
button and the loading stops.