32 STANDARD ELECTRICAL DICTIONARY.

Analysis, Electric.

Chemical analysis by electrolytic methods. (See Electrolytic Analysis.)

Analyzer, Electric.

An apparatus used in investigations on electric ether waves. It consists

of a series of parallel metallic wires. When the electric waves have

been polarized, the analyzer will only permit them to go through it

intact, when the plane of vibration of the waves is parallel to its

wires.

Anelectrics.

(a) Bodies which do not become electrified by friction; a term

introduced by Gilbert, now little used, as all bodies develop

electricity under proper conditions by contact action; the reverse of

idioelectrtics.

(b) Also a conductor of electricity, the reverse of a dielectric, q. v.

(See Conductor.)

It will be seen that Gilbert's anelectrics were, after all, the same as

the modern anelectrics, i.e., conductors.

Anelectrotonus.

A term used in medical electricity or electro-therapeutics to indicate

the deceased functional activity induced in a nerve by the proximity of

the anode of an active electric circuit completed through the nerve. The

converse of Kathelectrotonus.

Angle of Declination.

The angle of error of the magnetic needle or compass, measuring the

extent of its deviation from the meridian in any locality. It is the

angle between the plane of the magnetic axis of a magnetic needle free

to take its natural position, and the geographical meridian, the needle

being counterpoised if necessary, so as to hold an absolutely horizontal

position. The deviation is expressed as being east or west, referring

always to the north pole. (See Magnetic Elements.)

Synonym--Variation of the Compass.

[Transcriber's note: See Agonic Line.]

Angle of the Polar Span.

In a dynamo or motor the angle subtended by the portion of a pole piece

facing the armature, such angle being referred to the centre of the

cross-section of the armature as its centre.

The Standard Electrical Dictionary A Popular Dictionary of Words and Terms Used in the Practice of Electrical Engineering · 第 31 / 638 题