DIRECTION FOR TURNING]

=Illustration B—SINGLE PETAL DAISY WRAPPED OVER 1 SPOKE.= With left

thumb, hold yarn across center of winder leaving end extend about 1

inch beyond center. With right hand, pass yarn from left to right

around spoke at top (No. 1); across center of winder from right to

left around spoke directly opposite (No. 2), across center of winder

from left to right around spoke No. 3 at right of 1st spoke wrapped;

across center, from right to left around spoke No. 4 at left of 2nd

spoke wrapped; across center, from left to right around spoke No. 5;

across center, from right to left around spoke No. 6; and continue

in this way wrapping each spoke once, always passing across center

to wrap spoke opposite, until the 12th spoke is wrapped. Bring yarn

across center and cut end about 1 inch beyond center. MAKE CENTER

BEFORE REMOVING DAISY FROM WINDER. See Illustration E.

[Illustration: C]

=Illustration C—DOUBLE PETAL DAISY WRAPPED OVER 1 SPOKE.= With left

thumb hold yarn at center leaving end to extend about 1 inch; with

right hand, pass yarn from left to right around spoke No. 1 at

top; across center; from right to left around spoke No. 2 directly

opposite, wrap around these 2 spokes once more in same way; across

center, from left to right around spoke No. 3 at right of spoke 1st

wrapped; across center, from right to left around spoke No. 4 at

left of 2nd spoke wrapped; wrap these 2 spokes once more; across

center, from left to right around spoke No. 5; from right to left

around spoke No. 6; around these 2 once more; and continue in this

way wrapping twice around 2 spokes exactly opposite then passing on

to the next 2, until all spokes are wrapped twice ending with No. 12;

bring yarn across center and cut end about 1 inch beyond center. If

a daisy of more layers of petals is desired, wrap as many times as

you desire layers of petals. MAKE CENTER BEFORE REMOVING DAISY FROM

WINDER. See Illustration E.

[Illustration: D]

=Illustration D—SINGLE PETAL DAISY WRAPPED OVER 2 SPOKES.= With left

thumb, hold yarn at center allowing end to extend about 1 inch. With

right hand, pass yarn from left to right around spokes Nos. 1 and 2;

across center, from right to left around Nos. 3 and 4; across center,

around 5 and 6; across center, around 7 and 8; across center, around

9 and 10; across center, around 11 and 1; across center, around 12

and 3; across center, around 2 and 5; across center, around 4 and

7; across center, around 6 and 9; across center, around 8 and 11;

across center, around 10 and 12; across center, cut end about 1 inch

beyond center. MAKE CENTER BEFORE REMOVING DAISY FROM WINDER. See

Illustration E.

=TO MAKE DOUBLE PETAL DAISY WRAPPED OVER 2 SPOKES.= Make same as

single petal over 2 spokes, then continue to wrap in same way as many

times as desired.

[Illustration: E]

=Illustration E—Center.= Thread needle with yarn for center. Fasten

at center of wrong side of daisy as for embroidery. The side of daisy

toward you is the wrong side. Insert needle under 4 petals, draw yarn

through tightly; bring yarn back over the last 3 of these 4 petals,

insert needle under these 3 petals and 1 more making 4 petals in all;

draw yarn through, continue to bring yarn back over 3 petals and draw

it under 4 petals each time until you have made 13 stitches. Be sure

there are 13, otherwise your center will not be complete. As the

weaving stitches are worked, be careful to carry around the starting

yarn end of Daisy, taking each weaving stitch over this end for at

least 10 stitches so as to fasten it securely. This is particularly

necessary with all the cotton threads. Fasten yarn on wrong side. Cut

off all ends close to center.

Turn knob in opposite direction to draw in spokes and release daisy.

=Illustration F.= Right side of complete daisy.

[Illustration: F]

Designs for Crazy Daisy Winder · 第 3 / 45 题