Chipped stone tools were relatively uncommon at Lawhorn and are typified
in Figure 22. Number 1 and 2 are unifacial thumb nail scrapers. Number 3
is a reworked projectile point while numbers 4 and 5, are fine pointed
drills or scrapers. Number 6 is a graver.
One large tool showed a good work polish and also indications that it
had been resharpened (Fig. 22;7). It was 7 cm. wide and 15.5 cm. long.
There were several flint fragments showing a high degree of work polish
which came from similar type tools.
Two chipped and polished celts were found. One of these was 3 cm. wide
in the center and 2.4 cm. at the bit. It was 7.5 cm. long but broken so
that the true length could only be estimated at perhaps 10 cm. This was
a chisel type of tool. The second specimen was made by removing large
flakes over two faces to give a crude hand axe type of specimen 8 cm. ×
4.5 cm. × 2 cm. thick. Work polish was evident on the highest portions
of the surface.