THE HIVE
A hive may with all truth be called a bee-city, for in it there live
thousands upon thousands of little workers. In this chapter I hope to
tell you about the actual construction of this wonderful city, so that
you may understand more easily the chapters that will follow.
Hives used to be made of straw, and were called “skeps.” Some of these
skeps may still be seen in country places, but they are rapidly being
superseded by the more convenient wooden hive. The two kinds are shown
in Plate XIV. The wooden hive is a kind of box made in a special way,
and it is usually painted white, for this not only looks clean but
also keeps out the heat of the summer sun. You will notice that, like
one of our own houses, it is divided into three storeys. Close to the
floor of the hive, at the bottom of the lowest storey, is the door, and
this is made by cutting a slit in the wooden wall. Two little slips of
wood slide in front of it, so that it can be made narrower, or even
completely closed at the wish of the bee-keeper. If the bees themselves
wish to close up the entrance for any reason, they are able to do so
by blocking it up with wax. The top chamber of all is the roof, which
is empty, and serves to protect the hive from the rain. It must, of
course, be lifted off by the bee-keeper each time he wishes to look
into the hive. The second chamber is a sort of extra storehouse, and it
is used by the bees to store honey when the third chamber is full. This
third chamber is the most important of all, for it is here that the
bees live. It consists of rows upon rows of combs, some of which are
storeplaces for honey, but the greater part form the nurseries where
the young bees are brought up.
All the cells are built of wax, no matter whether they be honey cells
or cradles, and they are constructed in wooden frames which the
bee-keeper places in the hive for the purpose. In Plate XV. we see the
roof and the second chamber removed, exposing the inside of the bottom
chamber. The bee-man in the picture is lifting out one of these frames
of combs in order to examine it. The frames are simply four pieces of
wood, and are used so that the bees may not fasten their combs to the
walls of the hive, for if this were done it would not be possible for
us to remove them from the hive. The number of frames a hive contains
depends on the size and prosperity of the bee-city, and also on the
particular time of the year. If the city is a large one, and the
inhabitants numerous, there may be twelve or fourteen frames, each
containing thousands of separate cells. On the other hand, if the bees
are few, or suffering from any disease, the frames may be reduced to
half this number. Of course, the more numerous the frames, the greater
is the amount of work to be done, and the more workers will be required
to attend to the young bees, and to the duties of the hive. When
all the frames are in position, they look something like the picture in
Plate XVI.
[Illustration: PLATE XV
Lifting out a Frame of Comb]
[Illustration: PLATE XVI
From a photograph by] [E. Hawks
Showing the Frames in Position]
When we are examining a frame, we generally cover the others over with
a cloth, for the bees do not like the light to penetrate their city.
The frame having been replaced and the second chamber put on, we cover
all over with thick pieces of felt to keep the hive warm, and on top
is placed the roof. The hive stands on four legs, a few inches above
the level of the ground, and the door is generally sheltered by a kind
of porch. In front of the door there is a board which projects a few
inches, and this is called the alighting-board. On it the bees settle
when returning from the fields, and from it they commence their flight
when leaving the hive.