Materials Required:
4 skeins, Bear Brand Eidersil.
9 skeins Bear Brand Germantown, 8-fold.
1 Lattice pin, No. 4.
1 amber crochet hook, No. 9.
(NOTE—_These directions are based on 16 skeins to the box Germantown. If
the “10 skeins to the box” wool is used, the number of skeins required
will be proportionately less._)
Using the Germantown and crochet hook chain 101 loosely; turn, skip 1
chain and make 1 single crochet stitch (1 s. c.), in each chain to the
end. The work should measure thirty inches, for the length of afghan. If
a longer article is desired the row should contain a multiple of 4
stitches.
[Illustration]
Second row: turn and make 1 slip stitch, as follows, on the back thread
of each stitch of preceding row: insert the hook and draw wool through
stitch and the loop on hook.
Third row: turn, 1 s. c. in the back thread of each of the s. c.
stitches of first row, being careful to work into first stitch which is
inclined to draw down and be overlooked. Through the last stitch draw
the Eidersil and fasten off Germantown.
Broad Lattice row: draw up a long loop of Eidersil and slip it on the
pin, then wrap the same loop a second time around pin, draw working
thread in place. The pin is held under right arm firmly. Hold wrong side
of work toward you and with crochet hook * pull a long loop of wool
through the double threads of second stitch, slip it on pin and wrap the
second time, as before, draw working thread in place and repeat from *
in each stitch of row. 100 loops (200 wraps) on pin. Join the Germantown
and fasten off Eidersil. Slip loops from pin. There will be 100 long
loops in which to work the fifth row.
Fifth row: turn, * draw the third loop through the two first loops and
in it make 1 s. c., draw fourth loop through and in it make 1 s. c.,
then make 1 s. c. in each of the first and second loops, thus forming
the lattice. Repeat from * all along row. Turn. Repeat the second and
third rows, for the latter taking up the back thread of stitches of
fifth row. Draw Eidersil through and fasten off Germantown.
Eighth row: like fourth excepting that loops are slipped on pin and are
not wrapped the second time. 100 loops.
Ninth row: turn, * draw second loop through first and in it make 1 s. c.
then make 1 s. c. in first loop and repeat from * all across row.
Repeat the eighth and ninth rows twice more. These last 12 rows
constitute one pattern.
Repeat from the beginning of the second row until there are six broad
lattice rows: then repeat second, third and _again_ the second row and
fasten off. The afghan should now be 25 inches wide. The sides have no
finish.
Across each end work, as follows: with Germantown make * 3 s. c. in the
heavy band, ch. 3, 3 s. c. in next band—ch. 2, 1 s. c. in next band and
repeat from—, ch. 2 and repeat from * all along. Turn. Repeat second,
third and again second rows as given for afghan.
Fifth border row: with Germantown make 1 s. c. in end stitch, * skip 4,
5 d. c. in next, skip 4, 1 s. c. and repeat from * making 9 scallops
across end.
Sixth row: with Eidersil, * 1 s. c. in first s. c., ch. 2, 1 d. c.
around the post of first d. c. of scallop, 1 s. c. in second d. c., ch.
2, 1 d. c. around center d. c., 1 s. c. in fourth d. c., ch. 2, 1 d. c.
around last d. c. and repeat from * all across.