[Illustration: uncaptioned]
To permit ease when opening or closing the window, the fixture should
extend a little beyond the window on either side. Use a simple fixture,
an oval or round rod, and a draw type of drapery. If drapery is to be
shirred on the rod, take measurement from top of rod to lower edge of
window. To length measurement, add 2½″ for a 1½″ hem which forms the
casing and heading, and 2¾″ to 2½″ bottom hem. If _sew-on_ or _clip-on
rings are used, measure_ from lower circle of ring to edge of window. To
this measurement, add depth of top and bottom hem.
[Illustration: uncaptioned]