Before starting the engine be sure the gearshift lever is in neutral
position. Depress the accelerator to the toeboard once only and then
immediately release it. This permits the automatic choke to come into
full operation. This operation is essential to easy starting. Turn the
ignition key to the right. Then depress the clutch pedal to the toeboard
to operate the starter.
If engine should not start after a few revolutions, completely depress
accelerator and, holding it in this position, operate starter.
_Starting a Hot Engine_ It is easier to start a hot engine if the
accelerator is held approximately halfway to the floorboard until the
engine starts. Release the accelerator as soon as the engine starts.
_Warming Up the Engine_ A gasoline engine performs best when it reaches
an operating temperature of approximately 170° F. (76,7° C.). This is
the normal range indicated by the rectangular mark on the face of the
heat indicator. In cold weather the engine temperature should be raised
by allowing the engine to idle slowly before driving the car.
Do not drive the car until oil pressure registers on the gage. If it
registers above 40 lbs. (2,8 kgs.), drive slowly until pressure returns
to normal, or approximately 40 lbs. (2,8 kgs.).
After starting, the high idle system may cause the engine to “race”. If
so, depress and immediately release the accelerator.