CHAPTER II. THE MOST SUMPTUOUS PALACE AFLOAT

DIMENSIONS OF THE TITANIC--CAPACITY--PROVISIONS FOR THE COMFORT AND

ENTERTAINMENT OF PASSENGERS--MECHANICAL EQUIPMENT THE ARMY OF ATTENDANTS

REQUIRED.

THE statistical record of the great ship has news value at this time.

Early in 1908 officials of the White Star Company announced that they

would eclipse all previous records in shipbuilding with a vessel of

staggering dimensions. The Titanic resulted.

The keel of the ill-fated ship was laid in the summer of 1909 at the

Harland & Wolff yards, Belfast. Lord Pirrie, considered one of the

best authorities on shipbuilding in the world, was the designer. The

leviathan was launched on May 31, 1911, and was completed in February,

1912, at a cost of $10,000,000.

SISTER SHIP OF OLYMPIC

The Titanic, largest liner in commission, was a sister ship of the

Olympic. The registered tonnage of each vessel is estimated as 45,000,

but officers of the White Star Line say that the Titanic measured 45,328

tons. The Titanic was commanded by Captain E. J. Smith, the White Star

admiral, who had previously been on the Olympic.

She was 882 1/2 long, or about four city blocks, and was 5000 tons

bigger than a battleship twice as large as the dreadnought Delaware.

Like her sister ship, the Olympic, the Titanic was a four-funneled

vessel, and had eleven decks. The distance from the keel to the top of

the funnels was 175 feet. She had an average speed of twenty-one knots.

The Titanic could accommodate 2500 passengers. The steamship was divided

into numerous compartments, separated by fifteen bulkheads. She was

equipped with a gymnasium, swimming pool, hospital with operating room,

and a grill and palm garden.

CARRIED CREW OF 860

The registered tonnage was 45,000, and the displacement tonnage 66,000.

She was capable of carrying 2500 passengers and the crew numbered 860.

The largest plates employed in the hull were 36 feet long, weighing 43

1/2 tons each, and the largest steel beam used was 92 feet long, the

weight of this double beam being 4 tons. The rudder, which was operated

electrically, weighed 100 tons, the anchors 15 1/2 tons each, the center

(turbine) propeller 22 tons, and each of the two "wing" propellers 38

tons each. The after "boss-arms," from which were sus-pended the three

propeller shafts, tipped the scales at 73 1/2 tons, and the forward

"boss-arms" at 45 tons. Each link in the anchor-chains weighed 175

pounds. There were more than 2000 side-lights and windows to light the

public rooms and passenger cabins.

Nothing was left to chance in the construction of the Titanic. Three

million rivets (weighing 1200 tons) held the solid plates of steel

together. To insure stability in binding the heavy plates in the double

bottom, half a million rivets, weighing about 270 tons, were used.

All the plating of the hulls was riveted by hydraulic power, driving

seven-ton riveting machines, suspended from traveling cranes. The double

bottom extended the full length of the vessel, varying from 5 feet 3

inches to 6 feet 3 inches in depth, and lent added strength to the hull.

MOST LUXURIOUS STEAMSHIP

Not only was the Titanic the largest steamship afloat but it was the

most luxurious. Elaborately furnished cabins opened onto her eleven

decks, and some of these decks were reserved as private promenades that

were engaged with the best suites. One of these suites was sold for

$4350 for the boat's maiden and only voyage. Suites similar, but which

were without the private promenade decks, sold for $2300.

The Titanic differed in some respects from her sister ship. The Olympic

has a lower promenade deck, but in the Titanic's case the staterooms

were brought out flush with the outside of the superstructure, and the

rooms themselves made much larger. The sitting rooms of some of the

suites on this deck were 15 x 15 feet.

The restaurant was much larger than that of the Olympic and it had a

novelty in the shape of a private promenade deck on the starboard side,

to be used exclusively by its patrons. Adjoining it was a reception

room, where hosts and hostesses could meet their guests.

Two private promenades were connected with the two most luxurious suites

on the ship. The suites were situated about amidships, one on either

side of the vessel, and each was about fifty feet long. One of the

suites comprised a sitting room, two bedrooms and a bath.

These private promenades were expensive luxuries. The cost figured out

something like forty dollars a front foot for a six days' voyage. They,

with the suites to which they are attached, were the most expensive

transatlantic accommodations yet offered.

THE ENGINE ROOM

The engine room was divided into two sections, one given to the

reciprocating engines and the other to the turbines. There were two

sets of the reciprocating kind, one working each of the wing propellers

through a four-cylinder triple expansion, direct acting inverted engine.

Each set could generate 15,000 indicated horse-power at seventy-five

revolutions a minute. The Parsons type turbine takes steam from the

reciprocating engines, and by developing a horse-power of 16,000 at 165

revolutions a minute works the third of the ship's propellers, the one

directly under the rudder. Of the four funnels of the vessel three

were connected with the engine room, and the fourth or after funnel for

ventilating the ship including the gallery.

Practically all of the space on the Titanic below the upper deck

was occupied by steam-generating plant, coal bunkers and propelling

machinery. Eight of the fifteen water-tight compartments contained the

mechanical part of the vessel. There were, for instance, twenty-four

double end and five single end boilers, each 16 feet 9 inches in

diameter, the larger 20 feet long and the smaller 11 feet 9 inches long.

The larger boilers had six fires under each of them and the smaller

three furnaces. Coal was stored in bunker space along the side of the

ship between the lower and middle decks, and was first shipped from

there into bunkers running all the way across the vessel in the lowest

part. From there the stokers handed it into the furnaces.

One of the most interesting features of the vessel was the refrigerating

plant, which comprised a huge ice-making and refrigerating machine and

a number of provision rooms on the after part of the lower and orlop

decks. There were separate cold rooms for beef, mutton, poultry, game,

fish, vegetables, fruit, butter, bacon, cheese, flowers, mineral water,

wine, spirits and champagne, all maintained at different temperatures

most suitable to each. Perishable freight had a compartment of its own,

also chilled by the plant.

COMFORT AND STABILITY

Two main ideas were carried out in the Titanic. One was comfort and the

other stability. The vessel was planned to be an ocean ferry. She was

to have only a speed of twenty-one knots, far below that of some other

modern vessels, but she was planned to make that speed, blow high or

blow low, so that if she left one side of the ocean at a given time she

could be relied on to reach the other side at almost a certain minute of

a certain hour.

One who has looked into modern methods for safeguarding

{illust. caption = LIFE-BOAT AND DAVITS ON THE TITANIC

This diagram shows very clearly the arrangement of the life-boats and

the manner in which they were launched.}

a vessel of the Titanic type can hardly imagine an accident that could

cause her to founder. No collision such as has been the fate of any ship

in recent years, it has been thought up to this time, could send her

down, nor could running against an iceberg do it unless such an accident

were coupled with the remotely possible blowing out of a boiler. She

would sink at once, probably, if she were to run over a submerged rock

or derelict in such manner that both her keel plates and her double

bottom were torn away for more than half her length; but such a

catastrophe was so remotely possible that it did not even enter the

field of conjecture.

The reason for all this is found in the modern arrangement of

water-tight steel compartments into which all ships now are divided

and of which the Titanic had fifteen so disposed that half of them,

including the largest, could be flooded without impairing the safety

of the vessel. Probably it was the working of these bulkheads and the

water-tight doors between them as they are supposed to work that saved

the Titanic from foundering when she struck the iceberg.

These bulkheads were of heavy sheet steel and started at the very bottom

of the ship and extended right up to the top side. The openings in the

bulkheads were just about the size of the ordinary doorway, but the

doors did not swing as in a house, but fitted into water-tight grooves

above the opening. They could be released instantly in several ways,

and once closed formed a barrier to the water as solid as the bulkhead

itself.

In the Titanic, as in other great modern ships, these doors were held

in place above the openings by friction clutches. On the bridge was

a switch which connected with an electric magnet at the side of the

bulkhead opening. The turning of this switch caused the magnet to draw

down a heavy weight, which instantly released the friction clutch, and

allowed the door to fall or slide down over the opening in a second.

If, however, through accident the bridge switch was rendered useless the

doors would close automatically in a few seconds. This was arranged by

means of large metal floats at the side of the doorways, which rested

just above the level of the double bottom, and as the water entered

the compartments these floats would rise to it and directly release the

clutch holding the door open. These clutches could also be released by

hand.

It was said of the Titanic that liner compartments could be flooded

as far back or as far forward as the engine room and she would float,

though she might take on a heavy list, or settle considerably at one

end. To provide against just such an accident as she is said to have

encountered she had set back a good distance from the bows an extra

heavy cross partition known as the collision bulkhead, which would

prevent water getting in amidships, even though a good part of her bow

should be torn away. What a ship can stand and still float was shown a

few years ago when the Suevic of the White Star Line went on the rocks

on the British coast. The wreckers could not move the forward part of

her, so they separated her into two sections by the use of dynamite, and

after putting in a temporary bulkhead floated off the after half of

the ship, put it in dry dock and built a new forward part for her. More

recently the battleship Maine, or what was left of her, was floated out

to sea, and kept on top of the water by her water-tight compartments

only.

Sinking of the Titanic and Great Sea Disasters · 第 2 / 29 章