SIDE VIEW of Plough. _A_ Mould-board, the form of which is claimed as
new. _B_ Share claimed. _C_ Standard claimed. _DD_ Screw-bolt, and not
confining the beam to the Standard. _a_, _b_, _c_, _d_, _e_, the 1st,
2d, 3d, 4th and 5th sides mentioned in the specification. _g_, _g_.
Excavation at the fore part of the mould-board to receive the share
which fills it up and forms an even surface. _h_ Hole to receive the
knob or head cast on the under side of the share, which, on being
shoved up to its place, nooks under the mould-board at the upper side
of the hole, and is held in its place by a wooden wedge driven between
the knob and the lower side of the hole. _f_ Notches in the Standard
to receive the latch i in elevating or depressing the beam. _s_, _t_,
_v_. Straight diagonal lines touching the mould-board the whole
distance. _u_ Vertical or plumb line touching the mould-board from top
to bottom. _H_ Reverse side of the share. _x_ Knob to hold it fast to
the mould-board. _y_ Side view of knob. _zz_ Shiplaps fitting under
the point and edge of the mould-board. _k_ Another form of standard
keyed on top of beam. Fig. 2d, landside view: _E_ The "landside". _F_
part of landside cast with mould-board. _mm_ Cast loops to hold the
handles claimed. _n_ Head of screw-bolt held by a shoulder made by a
projection from the mould-board and standard, through which the bolt
passes up to the beam. _o_ Share claimed. _p_ Shiplap claimed. _G_
Inside view of landside. _r_ Tennon at forward end to fit into a
dovetailed mortice on the inside of that part which is cast with the
mould-board.