A hem (material folded back on itself) is needed on the top edge of
Section A to make the top strong enough so it will not tear when the
shears are slipped into the pocket.
[Illustration: Section A, ½ inch]
Measure ½ inch from the top edge of section A. Mark with pins. Then fold
the edge down so the pins lie on the outside of the fold. Press a fold
along the pins. Ask your leader to show you how to press with a steam
iron or a pressing cloth.
[Illustration: Press QUICKLY: Material SCORCHES Easily!]
You have learned to stitch straight by following a line. When you stitch
this hem your presser foot _not the needle_ will follow a line. Place
your material under the presser foot with the cut edge touching the
inside edge of the toe of the presser foot. Your leader will show you
how this is done.
[Illustration: {Sewing hem}]
Fold
Use 8 Stitches per inch
_Outside_ edge of toe runs along cut edge
You may want to practice before stitching the hem into this part of your
shears case. Look back to page 10 if you have forgotten how to start and
end a line of stitching.
[Illustration: Cut the flap as illustrated]