MORE COMPLICATED MATCH-BOX AND CORK TOYS
[Illustration: FIG. 109]
[Illustration: FIG. 110]
[Illustration: FIG. 111]
=A Paddle-wheel Steamer= (Fig. 109). The cover of a match-box, A B C D,
is covered on top and bottom with two pieces of stiff paper or cardboard
pointed at both ends (Fig. 110). A long strip of paper is cut, E F G,
etc., and fastened round the cover and projecting cardboard. The box is
gummed on to A B C D. The funnel is made of a roll of red paper (Fig.
111). The mast is a roll or strip of paper gummed to inside of box.
The wheels are strips of paper held together by a paper-fastener, the
paper being bent sideways. The paper-fastener clips the wheel to the
side of the box. A piece of cotton-wool can be put into the funnel for
smoke.
[Illustration: FIG. 112]
=A Castle and Drawbridge= (Fig. 112). A and B are match-boxes, with the
shorter sides cut off, gummed to a square piece of cardboard (4-inch
side). Along the bottom of these a piece of blue paper is gummed to
represent the water in the moat. C D F E is a piece of paper with
archway cut out, gummed to sides of boxes A and B, and behind this are
gummed match-box covers G and H. The drawbridge is a piece of stiff
paper hinged to C D, and has match sticks gummed across it. Holes are
made in the bridge and wall through which pieces of thread are passed;
the ends behind the drawbridge are fastened to a match.
[Illustration: FIG. 113]
K is a box turned upside down and gummed to G, H. L and M are covers
forming a passage from drawbridge. The castle can be enlarged by adding
more boxes.
=A Lighthouse= (Fig. 113). This toy is made from two corks gummed
together and fastened to the cover of a match-box which is gummed to a
square of cardboard covered with blue paper. Round the box, paper, cut
and coloured to represent rocks, is pasted and paper steps are fastened
to one edge. Into the top cork four pieces of matches are inserted and
between them is placed a small roll of red paper. A small piece of paper
with four holes in it is placed on top of the matches. The corks can
be coloured grey, and windows and doors painted on them. The top cork
must be filed to fit the lower one, and its upper end filed to make it
narrower.
[Illustration: FIG. 114]
=An Airship= (Fig. 114). The airship is made from three corks glued
together, the thickest cork being in the middle. Matches are inserted
at each end. Four matches are inserted into the corks and their other
ends glued into a match-box. A piece of black thread is fastened to the
matches as shown in the diagram. Matches and corks can be coloured dark
grey.
[Illustration: FIG. 115]
=A Bristol Biplane= (Fig. 115). A B, C D are two strips of paper, in
length about four times the length of a match-box, in width nearly
three-quarters the length of a match-box. These are fastened together by
match sticks, as shown in the diagram.
[Illustration: FIG. 116]
E F is cut from a piece of paper as long as A B and about the width of
a match-box. This paper is doubled along E F and marked and cut out
as in diagram (Fig. 116); then unfolded and pasted on the bottom of a
match-box (G), to which four small cardboard wheels are pasted. A B C D
is then gummed along the back of the box G at right angles to E F.
[Illustration: FIG. 117]
[Illustration: FIG. 118]
=A Bird-cage= (Fig. 117). This is made of two small squares of cartridge
paper fastened together by matches, as shown. When making the holes the
two pieces of paper should be placed together. A piece of cotton is
fastened to the matches so that the cage may be hung up. A bird for the
cage is made from a small cork, as in Fig. 118. The legs are two halves
of a match; the tail must touch the ground in order that the bird may
stand.
[Illustration: FIG. 119]
=A Travelling Menagerie= (Fig. 119). Cages are made from match-boxes.
The box is mounted on wheels, match sticks are glued inside the box, and
a piece of paper with holes in it is fitted to the tops of the matches.
[Illustration: FIG. 120]
Animals are cut out of paper and coloured. If these animals are cut from
a folded piece of paper (=Fig. 120=) they will stand.
[Illustration: FIG. 121]
The various cages can be harnessed to horses. A caravan to accompany the
menagerie is shown in =Fig. 121=. A piece of paper folded in three is
gummed to the inside of a match-box.
On the sides windows are marked, and a round paper chimney is gummed to
the top.
[Illustration: FIG. 122]
=A Fire-escape= (Fig. 122). The ladder is made from two narrow strips
of cardboard; holes are made in these and match sticks inserted. The
ends of the matches should be slightly filed or sand-papered. B is a
match-box, one end, C, of which is bent forward. To this end strips of
cardboard, C D, E F are gummed, and across them other strips, F D and
G H. Wheels can be gummed on as in the figure. L and M are cardboard
strips gummed to box and ladder to help to keep it in position. Thread
could be attached as shown in diagram, and an additional ladder made to
stand between L and M.
[Illustration: FIG. 123]
=A Mangle.= A is a match-box turned upside down to which are gummed two
corks which have been filed to make them perfect cylinders (B and C in
Fig. 123).
The two corks are gummed together and a strip of paper E is bent round
them, gummed to their flat ends, and also to the sides of the match-box
as at F. K and H are pieces of cardboard shaped as in diagram and
marked to imitate the iron legs of a mangle. These pieces are gummed
to the inner sides of the match-box to form the legs. G is a circle
of cardboard (on which spokes should be marked) fastened as shown in
diagram; to this a cardboard or match handle, L, is attached.
[Illustration: FIG. 124]
=A Submarine= (Fig. 124). A, B, C are corks filed to the shapes shown in
Fig. 124, and glued together. E F is a piece of cardboard, narrow and
pointed at each end, gummed to the corks. Before fastening it on holes
should be made in it round the edge. Through these small pins are put
and pushed into the corks to form a railing, and round them a piece of
black cotton is tied. G is a small cork, or a part of a large cork made
small by filing, gummed to E F; a match, H, is inserted to represent the
periscope. Pins are inserted round G with black cotton tied round them.
The corks, cardboard and matches should be coloured grey.
Older children can make this submarine so that it will float. The corks
A, B, C must be fastened together by pieces of wire passing through
them. The deck is made by filing the corks flat along the top, E F, and
pins are inserted around it. Cork G is fastened to B by a pin. A narrow
strip of lead is cut and pointed at each end, these ends are bent at
right angles and are inserted into slits in A and B.
This submarine will float well, and makes a very effective little toy.
It could be painted with grey enamel.
[Illustration: FIG. 125]
[Illustration: FIG. 126]
[Illustration: FIG. 127]
=A Barrel Organ.= Figs. 125, 126, 127 show how a barrel organ can be
made from a cork and match-box cover. A is a match-box cover, a cork; B,
is made a perfect cylinder by means of sand-paper, and gummed to side
of cover. It is kept in its place by a piece of paper, C D E, which is
gummed to cover and also to the cork. Wheels F and G are gummed to the
sides or made to revolve on axles as described in Chapter II. The handle
K is made of a match stick and bent piece of cardboard. Support H and
handles are made of cardboard.
Note that the piece of paper C D E reaches nearly to the ground. This
prevents the toy from overbalancing. Paper, etc., must be suitably
coloured. The match-box cover might have brown paper pasted round it.