The body may be sawed from 3/8" stock as outlined in the drawing. Find
its center of gravity by balancing it on a knife edge, crosswise, and
then lengthwise. Draw lines along the knife edge where it balances.
Where these intersect is the center of gravity. Bore a hole at this
point of intersection perpendicular to the body, and so as to fit
tight on a 1/4" dowel rod. Make two discs 1" diameter, 1/4" thick,
with a hole to fit tight on the dowel on each side of the man.
Color his shirt red, hat and trousers blue, arms and stockings white,
and dowel, shoes and parallel bars black.
The frame on which the man should balance (Fig. 11), with his head
just a little the lighter, is made of seven pieces. The base, 1/2" x
2" x 12"; the four uprights, 1/4" x 1" x 5-3/4", and the two bars,
3/8" x 3/4" x 15", are firmly fastened together so that the two bars
will be parallel and horizontal.
When the man is properly balanced, which may be accomplished by
whittling off a little stock where needed, he should roll from end to
end of the bars by giving the dowel a twist between two fingers.
[Illustration: Fig. 11.]
[Illustration: BALANCING BARRISTER]