This may be made of 1/4" stock. The base has two holes bored thru it
for the uprights with fit tight into the holes (Fig. 10). The perch is
2" long and has a brad in each end to swing on. These brads fit loose
thru the uprights near the top ends.
The parrot is sawed out, and a 3/4" brad driven up thru the foot which
also fits into the hole in the middle of the perch.
The parrot may be colored white with black trimmings, yellow beak and
eyes, red crest, tail and foot. The wings are green.
The stand should have a green base, red uprights, and yellow perch.
The bird should balance well and swing freely.
[Illustration: Fig. 10.]
[Illustration: PARROT]