SLIP BOX[4]

TIME: 6 hours.

MATERIALS: Newsboard, vellum, thin paper.

This box (Plate XXXVIII) by varying the size may be used for holding

pencils, checkers, a picture puzzle, or for other purposes.

Accurately lay out the box on the newsboard as shown in the drawing and

cut on the outside lines, preferably with the cardboard cutter. Along

the edges of the base score with a sharp knife or strong pin and turn

up the sides with the lines outside. The corners should be stayed with

a strip of vellum as shown to hold the box in shape.

Cut a strip of lining or other thin paper long enough to extend around

the box and lap over about ½ inch; the width should be at least one

inch greater than height of sides. Paste this strip to the sides of the

box allowing surplus width to extend equally above and below.

At each corner of the box make cuts in the paper so that it may be

pasted to the inside of the box at one edge and to the bottom of the

box at the other. It is advised that no attempt be made to line either

the inside or the base. The case should be enough larger than the box

to allow the latter to slip easily but not fall out. By making each

side of the case ⅛ of an inch wider than the corresponding sides of

the box, this is accomplished. It will be noticed that three narrow

faces are shown in the drawing. Lap the broader outside face B over the

narrower one A and paste securely. This gives stability to the outside.

Cut a strip of vellum long enough to paste around the box and extend

beyond it at least ½ inch at each end. Paste this to the foundation; at

each corner make cuts in the vellum, and paste projecting parts to the

inside of the foundation.

[4] From “War Time Occupations.”

[Illustration: PLATE XXXVIII.]

Bookbinding for beginners · 第 58 / 77 题