COPPER, MERCURY, AND SILVER
==================================================================
| | | | |
| | | | | FORMULAS OF OXIDES
| SYMBOL | ATOMIC | DENSITY | MELTING |___________________
| | WEIGHT | | POINT | |
| | | | | "ous" | "ic"
________|________|________|_________|_________|__________|________
| | | | | |
Copper | Cu | 63.6 | 8.89 | 1084° | Cu_{2}O | CuO
Mercury | Hg | 200.00 | 13.596 | -39.5° | Hg_{2}O | HgO
Silver | Ag | 107.93 | 10.5 | 960° | Ag_{2}O | AgO
==================================================================
~The family.~ By referring to the periodic arrangement of the elements
(page 168), it will be seen that mercury is not included in the same
family with copper and silver. Since the metallurgy of the three
elements is so similar, however, and since they resemble each other so
closely in chemical properties, it is convenient to class them together
for study.
1. _Occurrence._ The three elements occur in nature to some extent in
the free state, but are usually found as sulphides. Their ores are easy
to reduce.
2. _Properties._ They are heavy metals of high luster and are especially
good conductors of heat and electricity. They are not very active
chemically. Neither hydrochloric nor dilute sulphuric acid has any
appreciable action upon them. Concentrated sulphuric acid attacks all
three, forming metallic sulphates and evolving sulphur dioxide, while
nitric acid, both dilute and concentrated, converts them into nitrates
with the evolution of oxides of nitrogen.
3. _Two series of salts._ Copper and mercury form oxides of the types
M_{2}O and MO, as well as two series of salts. In one series the metals
are univalent and the salts have formulas like those of the sodium
salts. They are called cuprous and mercurous salts. In the other series
the metals are divalent and resemble magnesium salts in formulas. These
are called cupric and mercuric salts. Silver forms only one series of
salts, being always a univalent metal.
COPPER
~Occurrence.~ The element copper has been used for various purposes since
the earliest days of history. It is often found in the metallic state in
nature, large masses of it occurring pure in the Lake Superior region
and in other places to a smaller extent. The most valuable ores are the
following:
Cuprite Cu_{2}O.
Chalcocite Cu_{2}S.
Chalcopyrite CuFeS_{2}.
Bornite Cu_{3}FeS_{3}.
Malachite CuCO_{3}·Cu(OH)_{2}.
Azurite 2CuCO_{3}·Cu(OH)_{2}.
~Metallurgy of copper.~ Ores containing little or no sulphur are easy to
reduce. They are first crushed and the earthy impurities washed away.
The concentrated ore is then mixed with carbon and heated in a furnace,
metallic copper resulting from the reduction of the copper oxide by the
hot carbon.
~Metallurgy of sulphide ores.~ Much of the copper of commerce is
made from chalcopyrite and bornite, and these ores are more
difficult to work. They are first roasted in the air, by which
treatment much of the sulphur is burned to sulphur dioxide. The
roasted ore is then melted in a small blast furnace or in an
open one like a puddling furnace. In melting, part of the iron
combines with silica to form a slag of iron silicate. The
product, called crude matte, contains about 50% copper together
with sulphur and iron. Further purification is commonly carried
on by a process very similar to the Bessemer process for steel.
The converter is lined with silica, and a charge of matte from
the melting furnace, together with sand, is introduced, and air
is blown into the mass. By this means the sulphur is
practically all burned out by the air, and the remaining iron
combines with silica and goes off as slag. The copper is poured
out of the converter and molded into anode plates for refining.
~Refining of copper.~ Impure copper is purified by electrolysis. A large
plate of it, serving as an anode, is suspended in a tank facing a thin
plate of pure copper, which is the cathode. The tank is filled with a
solution of copper sulphate and sulphuric acid to serve as the
electrolyte. A current from a dynamo passes from the anode to the
cathode, and the copper, dissolving from the anode, is deposited upon
the cathode in pure form, while the impurities collect on the bottom of
the tank. Electrolytic copper is one of the purest of commercial metals
and is very nearly pure copper.
~Recovery of gold and silver.~ Gold and silver are often present
in small quantities in copper ores, and in electrolytic
refining these metals collect in the muddy deposit on the
bottom of the tank. The mud is carefully worked over from time
to time and the precious metals extracted from it. A surprising
amount of gold and silver is obtained in this way.
~Properties of copper.~ Copper is a rather heavy metal of density 8.9, and
has a characteristic reddish color. It is rather soft and is very
malleable, ductile, and flexible, yet tough and strong; it melts at
1084°. As a conductor of heat and electrical energy it is second only to
silver.
Hydrochloric acid, dilute sulphuric acid, and fused alkalis are almost
without action upon it; nitric acid and hot, concentrated sulphuric
acid, however, readily dissolve it. In moist air it slowly becomes
covered with a thin layer of green basic carbonate; heated in the air it
is easily oxidized to black copper oxide (CuO).
~Uses.~ Copper is extensively used for electrical purposes, for roofs and
cornices, for sheathing the bottom of ships, and for making alloys. In
the following table the composition of some of these alloys is
indicated:
COMPOSITION OF ALLOYS OF COPPER IN PERCENTAGES
Aluminium bronze copper (90 to 97%), aluminium (3 to 10%).
Brass copper (63 to 73%), zinc (27 to 37%).
Bronze copper (70 to 95%), zinc (1 to 25%), tin (1 to 18%).
German silver copper (56 to 60%), zinc (20%), nickel (20 to 25%).
Gold coin copper (10%), gold (90%).
Gun metal copper (90%), tin (10%).
Nickel coin copper (75%), nickel (25%)
Silver coin copper (10%), silver (90%).
~Electrotyping.~ Matter is often printed from electrotype plates
which are prepared as follows. The matter is set up in type and
wax is firmly pressed down upon the face of it until a clear
impression is obtained. The impressed side of the wax is coated
with graphite and the impression is made the cathode in an
electrolytic cell containing a copper salt in solution. When
connected with a current the copper is deposited as a thin
sheet upon the letters in wax, and when detached is a perfect
copy of the type, the under part of the letters being hollow.
The sheet is strengthened by pouring on the under surface a
suitable amount of molten metal (commercial lead is used). The
sheet so strengthened is then used in printing.
~Two series of copper compounds.~ Copper, like iron, forms two series of
compounds: in the cuprous compounds it is univalent; in the cupric it is
divalent. The cupric salts are much the more common of the two, since
the cuprous salts pass readily into cupric by oxidation.
~Cuprous compounds.~ The most important cuprous compound is the oxide
(Cu_{2}O), which occurs in nature as ruby copper or cuprite. It is a
bright red substance and can easily be prepared by heating copper to a
high temperature in a limited supply of air. It is used for imparting a
ruby color to glass.
By treating cuprous oxide with different acids a number of cuprous salts
can be made. Many of these are insoluble in water, the chloride (CuCl)
being the best known. When suspended in dilute hydrochloric acid it is
changed into cupric chloride, the oxygen taking part in the reaction
being absorbed from the air:
2CuCl + 2HCl + O = 2CuCl_{2} + H_{2}O.
~Cupric compounds.~ Cupric salts are easily made by dissolving cupric
oxide in acids, or, when insoluble, by precipitation. Most of them are
blue or green in color, and the soluble ones crystallize well. Since
they are so much more familiar than the cuprous salts, they are
frequently called merely copper salts.
~Cupric oxide~ (CuO). This is a black insoluble substance obtained by
heating copper in excess of air, or by igniting the hydroxide or
nitrate. It is used as an oxidizing agent.
~Cupric hydroxide~ (Cu(OH)_{2}). The hydroxide prepared by treating a
solution of a copper salt with sodium hydroxide is a light blue
insoluble substance which easily loses water and changes into the oxide.
Heat applied to the liquid containing the hydroxide suspended in it
serves to bring about the reaction represented by the equation
Cu(OH)_{2} = CuO + H_{2}O.
~Cupric sulphate~ (_blue vitriol_) (CuSO_{4}·5H_{2}O). This substance,
called blue vitriol or bluestone, is obtained as a by-product in a
number of processes and is produced in very large quantities. It forms
large blue crystals, which lose water when heated and crumble to a white
powder. The salt finds many uses, especially in electrotyping and in
making electrical batteries.
~Cupric sulphide~ (CuS). The insoluble black sulphide (CuS) is easily
prepared by the action of hydrosulphuric acid upon a solution of a
copper salt:
CuSO_{4} + H_{2}S = CuS + H_{2}SO_{4}.
It is insoluble in water and dilute acids.
MERCURY
~Occurrence.~ Mercury occurs in nature chiefly as the sulphide (HgS)
called cinnabar, and in globules of metal inclosed in the cinnabar. The
mercury mines of Spain have long been famous, California being the next
largest producer.
~Metallurgy.~ Mercury is a volatile metal which has but little affinity
for oxygen. Sulphur, on the other hand, readily combines with oxygen.
These facts make the metallurgy of mercury very simple. The crushed ore,
mixed with a small amount of carbon to reduce any oxide or sulphate that
might be formed, is roasted in a current of air. The sulphur burns to
sulphur dioxide, while the mercury is converted into vapor and is
condensed in a series of condensing vessels. The metal is purified by
distillation.
~Properties.~ Mercury is a heavy silvery liquid with a density of 13.596.
It boils at 357° and solidifies at -39.5°. Small quantities of many
metals dissolve in it, forming liquid alloys, while with larger
quantities it forms solid alloys. The alloys of mercury are called
amalgams.
Toward acids mercury conducts itself very much like copper; it is easily
attacked by nitric and hot, concentrated sulphuric acids, while cold
sulphuric and hydrochloric acids have no effect on it.
~Uses.~ Mercury is extensively used in the construction of scientific
instruments, such as the thermometer and barometer, and as a liquid over
which to collect gases which are soluble in water. The readiness with
which it alloys with silver and gold makes it very useful in the
extraction of these elements.
~Compounds of mercury.~ Like copper, mercury forms two series of
compounds: the mercurous, of which mercurous chloride (HgCl) is an
example; and the mercuric, represented by mercuric chloride (HgCl_{2}).
~Mercuric oxide~ (HgO). Mercuric oxide can be obtained either as a
brick-red or as a yellow substance. When mercuric nitrate is heated
carefully the red modification is formed in accordance with the equation
Hg(NO_{3})_{2} = HgO + 2NO_{2} + O.
The yellow modification is prepared by adding a solution of a mercuric
salt to a solution of sodium or potassium hydroxide:
Hg(NO_{3})_{2} + 2NaOH = 2NaNO_{3} + Hg(OH)_{2},
Hg(OH)_{2} = HgO + H_{2}O.
When heated the oxide darkens until it becomes almost black; at a higher
temperature it decomposes into mercury and oxygen. It was by this
reaction that oxygen was discovered.
~Mercurous chloride~ (_calomel_) (HgCl). Being insoluble, mercurous
chloride is precipitated as a white solid when a soluble chloride is
added to a solution of mercurous nitrate:
HgNO_{3} + NaCl = HgCl + NaNO_{3}.
Commercially it is manufactured by heating a mixture of mercuric
chloride and mercury. When exposed to the light it slowly changes into
mercuric chloride and mercury:
2HgCl = HgCl_{2} + Hg.
It is therefore protected from the light by the use of colored bottles.
It is used in medicine.
Most mercurous salts are insoluble in water, the principal soluble one
being the nitrate, which is made by the action of cold, dilute nitric
acid on mercury.
~Mercuric chloride~ (_corrosive sublimate_) (HgCl_{2}). This substance can
be made by dissolving mercuric oxide in hydrochloric acid. On a
commercial scale it is made by subliming a mixture of common salt and
mercuric sulphate:
2NaCl + HgSO_{4} = HgCl_{2} + Na_{2}SO_{4}.
The mercuric chloride, being readily volatile, vaporizes and is
condensed again in cool vessels. Like mercurous chloride it is a white
solid, but differs from it in that it is soluble in water. It is
extremely poisonous and in dilute solutions is used as an antiseptic in
dressing wounds.
~Mercuric sulphide~ (HgS). As cinnabar this substance forms the chief
native compound of mercury, occurring in red crystalline masses. By
passing hydrosulphuric acid into a solution of a mercuric salt it is
precipitated as a black powder, insoluble in water and acids. By other
means it can be prepared as a brilliant red powder known as vermilion,
which is used as a pigment in fine paints.
~The iodides of mercury.~ If a solution of potassium iodide is
added to solutions of a mercurous and a mercuric salt
respectively, the corresponding iodides are precipitated.
Mercuric iodide is the more important of the two, and as
prepared above is a red powder which changes to yellow on
heating to 150°. The yellow form on cooling changes back again
to the red form, or may be made to do so by rubbing it with a
knife blade or some other hard object.
SILVER
~Occurrence.~ Silver is found in small quantities in the uncombined state;
usually, however, it occurs in combination with sulphur, either as the
sulphide (Ag_{2}S) or as a small constituent of other sulphides,
especially those of lead and copper. It is also found alloyed with gold.
~Metallurgy.~ _Parkes's process._ Silver is usually smelted in connection
with lead. The ores are worked over together, as described under lead,
and the lead and silver obtained as an alloy, the silver being present
in small quantity. The alloy is melted and metallic zinc is stirred in.
Zinc will alloy with silver but not with lead, and it is found that the
silver leaves the lead and, in the form of an alloy with zinc, forms as
a crust upon the lead and is skimmed off. This crust, which, of course,
contains lead adhering to it, is partially melted and the most of the
lead drained off. The zinc is removed by distillation, and the residue
is melted on an open hearth in a current of air; by this means the zinc
and lead remaining with the silver are changed into oxides and the
silver remains behind unaltered.
~Amalgamation process.~ In some localities the old amalgamation
process is used. The silver ore is treated with common salt and
ferrous compounds, which process converts the silver first into
chloride and then into metallic silver. Mercury is then added
and thoroughly mixed with the mass, forming an amalgam with the
silver. After some days the earthy materials are washed away
and the heavier amalgam is recovered. The mercury is distilled
off and the silver left in impure form.
~Refining silver.~ The silver obtained by either of the above processes
may still contain copper, gold, and iron, and is refined by "parting"
with sulphuric acid. The metal is heated with strong sulphuric acid
which dissolves the silver, copper, and iron present, but not the gold.
In the solution of silver sulphate so obtained copper plates are
suspended, upon which the pure silver precipitates, the copper going
into solution as sulphate, as shown in the equation
Ag_{2}SO_{4} + Cu = 2Ag + CuSO_{4}.
The solution obtained as a by-product in this process furnishes most of
the blue vitriol of commerce. Silver is also refined by electrolytic
methods similar to those used in refining copper.
~Properties of silver.~ Silver is a heavy, rather soft, white metal, very
ductile and malleable and capable of taking a high polish. It surpasses
all other metals as a conductor of heat and electricity, but is too
costly to find extensive use for such purposes. It melts at a little
lower temperature than copper (961°). It alloys readily with other heavy
metals, and when it is to be used for coinage a small amount of
copper--from 8 to 10%--is nearly always melted with it to give it
hardness.
It is not acted upon by water or air, but is quickly tarnished when in
contact with sulphur compounds, turning quite black in time.
Hydrochloric acid and fused alkalis do not act upon it, but nitric acid
and hot, concentrated sulphuric acid dissolve it with ease.
[Illustration: Fig. 88]
~Electroplating.~ Since silver is not acted upon by water or air,
and has a pleasing appearance, it is used to coat various
articles made of cheaper metals. Such articles are said to be
silver plated. The process by which this is done is called
electroplating. It is carried on as follows: The object to be
plated (such as a spoon) is attached to a wire and dipped into
a solution of a silver salt. Electrical connection is made in
such a way that the article to be plated serves as the cathode,
while the anode is made up of one or more plates of silver
(Fig. 88, A). When a current is passed through the
electrolyte silver dissolves from the anode plate and deposits
on the cathode in the form of a closely adhering layer. By
making the proper change in the electrolyte and anode plate
objects may be plated with gold and other metals.
~Compounds of silver.~ Silver forms two oxides but only one series of
salts, namely, the one which corresponds to the mercurous and cuprous
series.
~Silver nitrate~ (_lunar caustic_) (AgNO_{3}). This salt is easily
prepared by dissolving silver in nitric acid and evaporating the
resulting solution. It crystallizes in flat plates, and when heated
carefully can be melted without decomposition. When cast into sticks it
is called lunar caustic, for it has a very corrosive action on flesh,
and is sometimes used in surgery to burn away abnormal growths.
The alchemists designated the metals by the names of the
heavenly bodies. The moon (luna) was the symbol for silver;
hence the name "lunar caustic."
~Silver sulphide~ (Ag_{2}S). This occurs in nature and constitutes one of
the principal ores of silver. It can be obtained in the form of a black
solid by passing hydrosulphuric acid through a solution of silver
nitrate.
~Compounds of silver with the halogens.~ The chloride, bromide, and iodide
of silver are insoluble in water and acids, and are therefore
precipitated by bringing together a soluble halogen salt with silver
nitrate:
AgNO_{3} + KCl = AgCl + KNO_{3}.
They are remarkable for the fact that they are very sensitive to the
action of light, undergoing a change of color and chemical composition
when exposed to sunlight, especially if in contact with organic matter
such as gelatin.
~Photography.~ The art of photography is based on the fact that
the halogen compounds of silver are affected by the light,
particularly in the presence of organic matter. From a chemical
standpoint the processes involved may be described under two
heads: (1) the preparation of the negative; (2) the preparation
of the print.
1. _Preparation of the negative._ The plate used in the
preparation of the negative is made by spreading a thin layer
of gelatin, in which silver bromide is suspended (silver iodide
is sometimes added also), over a glass plate or celluloid film
and allowing it to dry. When the plate so prepared is placed in
a camera and the image of some object is focused upon it, the
silver salt undergoes a change which is proportional at each
point to the intensity of the light falling upon it. In this
way an image of the object photographed is produced upon the
plate, which is, however, invisible and is therefore called
"latent." It can be made visible by the process of developing.
To develop the image the exposed plate is immersed in a
solution of some reducing agent called the developer. The
developer reduces that portion of the silver salt which has
been affected by the light, depositing it in the form of black
metallic silver which closely adheres to the plate.
The unaffected silver salt, upon which the developer has no
action, must now be removed from the plate. This is done by
immersing the plate in a solution of sodium thiosulphate
(hypo). After the silver salt has been dissolved off, the plate
is washed with water and dried. The plate so prepared is
called the negative because it is a picture of the object
photographed, with the lights exactly reversed. This is called
fixing the negative.
2. _Preparation of the print._ The print is made from paper
which is prepared in the same way as the negative plate. The
negative is placed upon this paper and exposed to the light in
such a way that the light must pass through the negative before
striking the paper. If the paper is coated with silver
chloride, a visible image is produced, in which case a
developer is not needed. The proofs are made in this way. In
order to make them permanent the unchanged silver chloride must
be dissolved off with sodium thiosulphate. The print is then
toned by dipping it into a solution of gold or platinum salts.
The silver on the print passes into solution, while the gold or
platinum takes its place. These metals give a characteristic
color or tone to the print, the gold making it reddish brown,
while the platinum gives it a steel-gray tone. If a silver
bromide paper is used in making the print, a latent image is
produced which must be developed as in the case of the negative
itself. The silver bromide is much more sensitive than the
chloride, so that the printing can be done in artificial light.
Since the darkest places on the negative cut off the most
light, it is evident that the lights of the print will be the
reverse of those of the negative, and will therefore correspond
to those of the object photographed. The print is therefore
called the positive.
EXERCISES
1. Account for the fact that copper has been used for so long a time.
2. Write equations for the action of concentrated sulphuric and nitric
acids upon the metals of this family.
3. How would you account for the fact that normal copper sulphate is
slightly acid to litmus?
4. Contrast the action of heat on cupric nitrate and mercuric nitrate.
5. State reasons why mercury is adapted for use in thermometers and
barometers.
6. How could you distinguish between mercurous chloride and mercuric
chloride?
7. Write equations for the preparation of mercuric and mercurous
iodides.
8. How would you account for the fact that solutions of the different
salts of a metal usually have the same color?
9. Crude silver usually contains iron and lead. What would become of
these metals in refining by parting with sulphuric acid?
10. In the amalgamation process for extracting silver, how does ferrous
chloride convert silver chloride into silver? Write equation. Why is the
silver sulphide first changed into silver chloride?
11. What impurities would you expect to find in the copper sulphate
prepared from the refining of silver?
12. How could you prepare pure silver chloride from a silver coin?
13. Mercuric nitrate and silver nitrate are both white solids soluble in
water. How could you distinguish between them?
14. Account for the fact that sulphur waters turn a silver coin black;
also for the fact that a silver spoon is blackened by foods (eggs, for
example) containing sulphur.
15. When a solution of silver nitrate is added to a solution of
potassium chlorate no precipitate forms. How do you account for the fact
that a precipitate of silver chloride is not formed?