CHAPTER XLIV.

SODIUM AND ITS COMPOUNDS.

Examine NaCl, Na2SO4, Na2CO3, Na, NaOH, HNaCO3, NaNO3.

226. Order of Derivation.--Though K is more metallic, or electro-

positive, than Na, the compounds of Na are more important, and

will be considered first. The only two compounds of Na which

occur extensively in nature are NaCl and NaNO3. Almost all others

are obtained from NaCl, as shown by this table, which should be

memorized and frequently recalled.

) Na

NaCl ) Na2SO4) Na2CO3) NaOH

NaNO3) ) ) HNaCO3

From what is Na2SO4 prepared, as shown by the table? Na2CO3? Na?

227. Occurrence and Preparation of NaCl.--NaCl occurs in sea

water, of which it constitutes about three per cent, in salt

lakes, whose waters sometimes hold thirty per cent, or are nearly

saturated, and, as rock salt, in large masses underground. Poland

has a salt area of 10,000 square miles, in some parts of which

the pure transparent rock salt is a quarter of a mile thick. In

Spain there is a mountain of salt five hundred feet high and

three miles in circumference. France obtains much salt from sea

water. At high tide it flows into shallow basins, from which the

sun evaporates the water, leaving NaCl to crystallize. In Norway

it is separated by freezing water, and in Poland it is mined like

coal. In New York and Michigan it is obtained by evaporating the

brine of salt wells, either by air and the sun's heat, or by

fire. Slow evaporation gives large crystals; rapid, small ones.

228. Uses.--The main uses are for domestic purposes and for

making the Na and Cl compounds. In the United States the

consumption amounts to more than forty pounds per year for every

person.

229. Sodium Sulphate.--What acid and what base are represented by

Na2SO4? Which is the stronger acid, HCl or H2SO4? Would the

latter be apt to act on NaCl? Why?

230. Manufacture.--This comprises two stages shown by the

following reactions, in which the first needs moderate heat only;

the last, much greater.

(1) 2 NaCl + H2SO4 = HNaSO4 + NaCl + HCl:

(2) NaCl + HNaSO4 = Na2S4 + HCl.

The operation is carried on in large furnaces. The gaseous HCl is

passed into towers containing falling water in a fine spray, for

which it has great affinity. The solution is drawn off at the

base of the tower. Thus all commercial HCl is made as a by-

product in manufacturing Na2SO4.

When crystalline, sodium sulphate has ten molecules of water of

crystallization (Na2SO4, 10 H2O); it is then known as Glauber's

salt. This salt readily effloresces; i.e. loses its water of

crystallization, and is reduced to a powder. Compute the

percentage of water.

231. Uses.--The leading use of Na2SO4 is to make Na2CO3; it is

also used to some extent in medicine, and in glass manufacture.

232. Sodium Carbonate.--Note the base and the acid which this

salt represents. Test a solution of the salt with red and blue

litmus, and notice the alkaline reaction. Do you see any reason

for this reaction in the strong base and the weak acid

represented by the salt?

233. Manufacture.--Na2CO3 is not made by the union of an acid and

a base, nor is H2CO3 strong enough to act on many salts. The

process must be indirect. This consists in reducing Na2SO, to

Na2S, by taking away the O with C, charcoal, and then changing

Na2S to Na2O3 by CaCO3, limestone. The three substances, Na2SO4,

C, CaCO3, are mixed together and strongly heated. The reactions

should be carefully studied, as the process is one of much

importance.

(1) Na2SO4 + 4 C = Na2S + 4 CO.

(2) Na2S + CaCO3 = CaS + Na2CO3.

Observe that C is the reducing agent. The gas CO escapes. The

solid products Na2CO3 and CaS form black ash, the former being

very soluble, the latter only sparingly soluble in water. Na2CO3

is dissolved out by water, and the water is evaporated. This

gives commercial soda. CaS, the waste compound in the process,

contains the S originally in the H2SO4 used. This can be

partially separated and again made into acid. Describe the

manufacture of NaCO3 in full, starting with NaCl. This is called

the Le Blanc process, but is not the only one now employed to

produce this important article.

234. Occurrence.-Sodium carbonate is found native in small

quantities. It forms the chief surface deposit of the "alkali

belt" in western United States, where it often forms

incrustations from an inch to a foot in thickness. It was

formerly obtained from sea-weeds, by leaching their ashes, as, by

a like process, K2CO3 was obtained from land plants.

235. Uses.--Na2CO3 forms the basis of many alkalies, as H2SO4

does of acids. Of all chemical compounds it is one of the most

important, and its manufacture constitutes one of the greatest

chemical industries. Its economical manufacture largely depends

on the demand for HCl, which is always formed as a by-product. As

but little HCl is used in this country, Na2CO3 is mostly

manufactured in Europe. The chief uses are for glass and

alkalies.

236. Sodium.--Na must always be kept under naphtha, or some other

liquid compound containing no O, since it oxidizes at once on

exposure to the air. For this reason it never occurs in a free

state.

237. Preparation.-By depriving Na2CO3 of C and O, metallic sodium

is formed. As usual, heated charcoal is the reducing agent. The

end of the retort, which holds the mixture, dips under naphtha.

Na2CO3 + 2 C = 2 Na + 3 CO. The process is a difficult one, and

Na brings five dollars per pound, though in its compounds it is a

third as common as Fe. K is as abundant as Na, but more difficult

of separation, and is worth three dollars per ounce. Notice the

position of K and Na at the positive end of the elements.

238. Uses.--Na is used to reduce Al, Ca, Mg, Si, which are the

most difficult elements to separate from their compounds. It acts

in these cases as a reducing agent.

239. Sodium Hydrate. Review Experiment 62.

Experiment 118.--Put into a t.t. 10cc. H2O and 2 or 3 g. NaOH.

Note its easy solubility. Test with litmus. Will it neutralize

any acids?

240. Preparation. -- Sodium hydrate, caustic soda, or soda by

lime, is made by treating a solution of Na2CO3 with milk of lime.

CaCO3 is precipitated and al- lowed to settle, the solution is

poured off, and NaOH is obtained by evaporating the water and

running the residue into molds.

241. Use.--NaOH is a powerful caustic, but its chief use is in

making hard soap.

242. Hydrogen Sodium Carbonate.--Hydrogen so- dium carbonate,

bicarbonate of sodium, acid sodium carbonate, cooking-soda, etc.,

HNaCO3, is prepared by passing CO2 into a solution of Na2CO3.

Na2CO3 + H2O + CO2 = 2 HNaCO3. Test a solution of it with litmus.

Account for the result. Its use in bread-making depends on the

ease with which CO2 is liberated. Even a weak acid, as the lactic

acid of sour milk, sets this free, and thus causes the dough to

rise.

243. Sodium Nitrate.--Sodium nitrate occurs in Chili and Peru. It

is the main source of HNO3.

Review Experiments 46 and 52. From NaNO3 is also made KNO3,

(NaNO3 + KCl = NaCl + KNO3), one of the ingredients of gunpowder.

By reason of its deliqcescence NaNO3 is not suitable for making

gunpowder, though it is sometimes used for blasting-powder. The

action of the latter is slower than that made from KNO3. NaNO3 is

cheaper and more abundant than KNO3; this is true of most Na

compounds in comparison with those of K.

An Introduction to Chemical Science · 第 42 / 58 章