CHAPTER XVII.

DIPPING CURDS.

There is nothing so difficult in cheese-making as to determine the exact

point when a curd ought to be taken out of the vat and salted. A slight

variation either way from this point makes an uneven lot of cheese, and

much variation spoils the batch, so that it will not pass for "prime."

Every cheese-maker has felt the want of some test whereby the exact

point, when a curd is sufficiently "done" to dip, can be determined with

certainty. Neither the sense of smell, the sense of taste, nor the sense

of touch is infallible. The evidence of this fact can be seen in any

factory during the season of cheese-making. A simple test of acidity,

which is claimed to be conclusive, is the application of a hot iron to a

lump of curd. The iron wants to be searing hot--not red hot, but hot

enough to toast cheese. Take up a small handful of curd, squeeze the

whey out of it, and touch the hot iron to it, holding it there for a

moment, or until it adheres and begins to melt or toast the cheese. Then

pull the iron gently away from the curd. If the curd is raw and sweet,

it will break short off from the iron and appear crumbly. If slightly

acid, it will slightly pull out in threads, but not very long ones. As

the acid develops, the stringiness increases. At a certain point, the

curd will cling to the iron and pull out in numerous fine threads an

inch or two long. Beyond this point, the threads grow longer but fewer,

until there will be only one, which will draw out a foot or so, and then

break, recoiling somewhat like India-rubber. Indeed, the curd grows

tougher and more stringy from the time it begins to take on acid

perceptibly, until it finally ends in stringing indefinitely, like wax,

having passed the point of breaking and flying back. The successive

stages of development are gradual, but very marked, and cannot fail to

be recognized after a few experiments.

Thus having obtained a means of telling the degree of acid developed, it

only remains to be decided at what point to dip the curd. It is claimed

that the proper one is where the threads are the finest and most

numerous. Beyond this point, the threads diminish in number but increase

in length, which is an indication of too much acid. It is asserted that

the hot iron test is uniform and reliable, besides being easy of

application. Cheese-makers can make their own experiments, and we advise

them to try the hot iron to their own satisfaction. If it should prove

as conclusive as good judges think it will, it will be of immense value

to our dairymen.

This test reminds us of the test used by maple-sugar makers to determine

when the batch has reached the point where it will "grain" and "cake"

well. They make a small bow of a twig, dip it into the sugar, which

adheres to and fills it, and then they blow through the bow. If no

bubble forms and floats off like a soap-bubble, the batch is not done.

But if they can blow a string of bubbles, or one long bubble, it is time

to remove the heat. The stringing of the cheese-curd, on the application

of the hot iron, seems to afford a very similar test for the

cheese-maker.

It is not claimed that the use of the hot iron will necessarily insure

the making of good cheese. It only determines the degree of acidity,

which is one very important point. Other things are requisite to the

manufacture of a prime article, and the same care, attention, and

labor, in other matters, will remain just as essential. By using the hot

iron, however, it is claimed that the cheese-maker can tell, every time,

just how sour his curd is.

Hints on cheese-making, for the dairyman, the factoryman, and the manufacturer · 第 17 / 23 章