Materials required:
5 strands of narrow gimp, 12″ each
1 strand of narrow gimp, 3¼ yds.
¾″ steel bracelet core
Fasten the five short strands to the band as shown in figure 12. Then
weave across the band in any of the ways shown below, bringing the
strand through the center after each row. (Fig. 13.) Several two-color
combinations of these stitches are suggested here, but do not let these
limit your originality, as there are very many possible patterns. Finish
off the bracelet as described on page 2.
[Illustration: Fig. 12]
[Illustration: Fig. 13]