Cut two pieces of perforated board, or of stiff morocco, two inches
long by one and a half wide, and stitch them together, leaving one
end open. If you choose the board, a little border in cat-stitch or
feather-stitch should be worked before putting the pieces together,
and, if you like, an initial in the middle of one side. If the morocco
is chosen, an initial in colored silk will be pretty, and the edges
should be bound with narrow ribbon, and over-handed together.
Cut two other pieces of the material a quarter of an inch smaller than
the first. Bind the morocco with ribbon. Make a fastening at one end
with a ribbon loop; place the stamps between the two, and slip the
little envelope thus filled into the outer case, the open end down. It
fits so snugly that it will not fall out in the pocket, and is easily
drawn forth by means of the loop when papa wants to get at his stamps.
[Illustration: A POSTAGE-STAMP HOLDER.]
A letter-case for papa's other pocket: This can be made either of
morocco, oiled silk, or rubber cloth. Cut an envelope-shaped piece,
about an inch larger all round than an ordinary letter envelope. Bind
the edges, work an initial on one side, and for a fastening use a loop
of elastic braid.