_If the rules are not attended to, the paper will be cancelled._
You may take the Elementary, or the Advanced, or the Honours paper, but
you must confine yourself to one of them.
Put the number of the question before your answer.
You are expected to prove your knowledge of machinery as well as your
power of drawing neatly to scale. You are therefore to supply details
omitted in the sketches, to fill in parts left incomplete, and to
indicate, by diagonal lines, parts cut by planes of section.
No credit will be given unless some knowledge of projection is shown, so
that at least two views of one of the examples will be required properly
projected one from the other. The centre lines should be clearly drawn.
The figured dimensions need not be inserted.
Your answers should be clearly and cleanly drawn in pencil. No extra
marks will be allowed for inking in.
All figures must be drawn on the single sheet of paper supplied, for no
second sheet will be allowed.
The value attached to each question is shown in brackets after the
question. But a full and correct answer to an easy question will in all
cases secure a larger number of marks than an incomplete or inexact
answer to a more difficult one.
Your name is not given to the Examiner, and you are forbidden to write
to him about your answers.
You are to confine your answers _strictly_ to the questions proposed.
A single accent (') signifies _feet_; a double accent (") _inches_.
_The examination in this subject lasts for four hours._
* * * * *
First Stage or Elementary Examination. 1885.