These people still retain the art of making flint arrow and
spearheads, and other implements such as the blades for the skin
scrapers to be hereafter described. Many of the flint arrowheads and
spear points already described were made at Nuwŭk or Utkiavwĭñ
especially for sale to us and are as finely formed and neatly finished
as any of the ancient ones. The flints, in many cases water-worn
pebbles, appear to have been splintered by percussion into fragments
of suitable sizes, and these sharp-edged spalls are flaked into shape
by means of a little instrument consisting of a short, straight rod of
some hard material mounted in a short curved haft. We collected nine
of these tools (kĭ´gli) of which two have no blades. No. 89262 [1223]
figured in Point Barrow Report, Ethnology, Pl. III, Fig. 7, has been
selected as the type. The handle is of walrus ivory, 7.8 inches long,
straight and nearly cylindrical for about 4½ inches, then bending down
like a saw handle and spread out into a spatulate butt. Fitted into a
deep groove on the top of the handle so that its tip projects 1.8
inches beyond the tip of the latter is a slender four-sided rod of
whale’s bone, 4.7 inches long. This is held in place by two simple
lashings, one of cotton twine and the other of seal thong. The flint
to be flaked is held in the left hand and pressed against the fleshy
part of the palm which serves as a cushion and is protected by wearing
a thick deer-skin mitten. The tool is firmly grasped well forward in
the right hand with the thumb on top of the blade and by pressing the
point steadily on the edge of the flint, flakes of the desired size
are made to fly off from the under surface.
These tools vary little in pattern, but are made of different
materials. Hard bone appears to have been the commonest material for
the blade, as three out of the seven blades are of this substance. One
specimen (No. 89263 [796] from Utkiavwĭñ) has a blade of iron of the
same shape but only 2 inches long. No. 89264 [1001] also from
Utkiavwĭñ, Fig. 279_a_, has a short blade of black flint flaked into a
four-sided rod 1½ inches long. This is held in place by a whipping of
stout seal thong tightened by thrusting a splinter of wood in at the
back of the groove.
[Illustration: FIG. 279.--Flint flakers. 1/2]
[Illustration: FIG. 280.--Haft of flint flaker. 1/2]
Two specimens (Nos. 89260 [794] Fig. 279_b_ and 89261 [1216] both from
Utkiavwĭñ) have blades of the peculiar Nuɐsuknan concretions
previously described. Each is an oblong pebble wedged into the groove
and secured by a lashing as usual. No. 89260 [794] has a haft of
antler. This is rather the commonest material for the haft. Two
specimens have hafts of walrus ivory and three of fossil ivory. The
length of the haft is from 6 to 8 inches, of the blade 1.5 to 4.7
inches. Fig. 280 (No. 89265 [979] from Nuwŭk) is the haft of one of
these tools, made of fossil ivory, yellow from age and stained brown
in blotches, which shows the way in which the groove for the blade was
excavated, namely, by boring a series of large round holes and cutting
away the material between them. The remains of the holes are still to
be seen in the bottom of the groove. The tip of this haft has been
roughly carved into a bear’s head with the eyes and nostrils incised
and filled with black dirt, and the eyes, nostrils, and mouth of a
human face have been rudely incised on the under side of the butt and
also blackened. All this carving is new and was done with the view of
increasing the market value of the object. The original ornamentation
consists of an incised pattern on the upper surface of the butt,
colored with red ocher which has turned black from age and dirt.
Fig. 281 (No. 89782 [1004_e_]) is one of these tools, very neatly
made, with a haft of reindeer antler and a bone blade, secured by a
whipping of seal thong which belongs with the “kit” of tools owned by
the “inland” native, Ilû´bw’ga. Mr. Nelson collected a number of
specimens of this tool at various points on the northwest coast from
Point Hope as far south as Norton Bay, but I can find no evidence of
its use elsewhere.
[Illustration: FIG. 281.--Flint flaker with bone blade. 1/3]