After the top connectors have been drilled off and the group is to be
reassembled in the repaired battery, in order to make a good quick weld
to the top strap, the post must be built up to its original height.
[Illustration: Figure 17. See bottom of page]
The Ambu Post Builders, Figure 17, have been built to speed up the post
building process. They are made of high grade steel and are of the
proper size to rebuild all the standard battery posts.
Simply place the proper Ambu Post Builder on the stub post, and burn in
molten lead to the proper height. The construction is such that the post
builder is easily removed, leaving a new and perfectly sized post for
burning to the cell connector.
The set of ten, illustrated in Figure 17, covers all standard makes of
batteries.
* * * * *
=Following are prices of equipment illustrated in preceding pages=
which may be purchased from the Battery Appliance Division, American
Bureau of Engineering, Inc., 2632 Prairie Avenue, Chicago, or from
your Jobber.
Adjustable Screw Mould (Fig. 13) $12.50
Battery Post Builders. Set of Ten (Fig. 17) 2.00
Ladle for Pouring Lead and Sealing Compound (Fig. 17) 2.75
Lead Stick Moulds (Fig. 14). (Pair, $2.75), each 1.50
Link Combination Mould (Fig. 8A) complete 35.00
Mould Compound for making castings “come clean” (Fig. 6) .50
Plate Burning Rack, Large Type “B” (Fig. 15) 8.75
Plate Burning Rack, Small Type “A” (Fig. 16) 5.95
Post Strap Mould (Fig. 10) complete 18.00
Production Post Strap Mould (Fig. 11) complete 35.00
Terminal Mould (Fig. 9) complete 9.85
* * * * *