Hollow Tile Problem

_By referring to pages 25 and 26, it will be seen that four courses

of brick with a 3/8-inch joint equal in height two 5" × 12" tile,

so that, in our present example, if we wish to use the 3/8-inch

joint, we shall have to introduce our bonding course of brick every

fifth instead of every sixth course. This would also naturally

involve a slight change in the number of face brick required. That

is, instead of adding 16-2/3% or we should have to add 20% or

1/5 to the number required for Running Bond, in order to get the

right number for fifth course Common Bond and, in consequence, we

subtract 20% or one fifth from the backing tile wanted. With these

changes understood, our problem for a hollow tile backing for the

gable wall will work out as follows:_

If the hollow tile backing is started at grade, the tile and face

brick area will be the same. But as, in the present case, we start

the tile backing from the first floor, we subtract the area of the

wall from grade to first floor or 25' × 3' = 75', and get 517 - 75

or 442 sq. ft. to be backed with tile.

The closures for horizontal tile are figured separately. A full

and a half closure are respectively 12 and 6 inches in length and

amount to about one foot in height, and hence cover an area of 3/4

sq. ft. on each side or 1-1/2 sq. ft. on both sides of the opening.

As the height of our five window openings is approximately 25 feet,

we have 25 × 1-1/2 = 37-1/2 sq. ft. to be deducted from area of

regular tile surface, giving 442 - 37-1/2 or 404-1/2 sq. ft.

As per coefficient table, page 106,

we have 404.5 × 2.15 = 870

Deduct 1/5 of tile for brick bond 174

---

696

Add 3% for wastage or 21

---

=Total number of tile to be ordered= 717

Requiring 4 closures, 2 full and 2

half, for each foot of height (both

sides), we need 25 × 4 or 100 closures

Add 3% for wastage or 3

---

=Total number of closures needed= 103

Order 52 of each size.

Brick-size tile, 12 to every 16 sq. ft.

needed. Hence, 442 ÷ 16 gives about

28, and 12 × 28 = 336

Add 3% for wastage or 10

---

=Total brick-size tile to be ordered= 346

A manual of face brick construction · 第 112 / 156 题