The machine represented in the annexed engravings consists of a movable
inductor, whose alternate poles pass in front of an armature composed of
a double number of oblong and flat bobbins, that are affixed to a circle
firmly connected with the frame. There is a similar circle on each side
of the inductor. The armature is stationary, and the wires that start
from the bobbins are connected with terminals placed upon a wooden
support that surmounts the machine.
[Illustration: GERARD'S ALTERNATING ELECTRIC MACHINE.]
This arrangement allows of every possible grouping of the currents
according to requirements. Thus, the armature may be divided into two
currents, so as to allow of carbons 30 mm. in diameter being burned, or
else so as to have four, eight, twelve, twenty-four, or even forty-eight
distinct circuits capable of being used altogether or in part.
This machine has been studied with a view of rendering the lamps
independent; and there may be produced with it, for example, a voltaic
arc of an intensity of from 250 to 600 carcels for the lighting of a
courtyard, or it may be used for producing arcs of less intensity for
shops, or for supplying incandescent lamps. As each of the circuits is
independent, it becomes easy to light or extinguish any one of the lamps
at will. Since the conductors are formed of ordinary simple wires, the
cost attending the installation of 12 or 24 lamps amounts to just about
the same as it would in the case of a single cable.
[Illustration: GERARD'S 250 H.P. DIRECT CONNECTION ALTERNATING CURRENT
STEAM DYNAMO-ELECTRIC MACHINE.]
One of the annexed cuts represents a Corliss steam engine connected
directly with an alternating current machine of the system under
consideration. According to the inventor, this machine is capable of
supplying 1,000 lamps of a special kind, called "slide lamps," and a
larger number of incandescent ones.--_Revue Industrielle_.
* * * * *