[A] See at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: INSERTION IN EMBROIDERED NETTING.—ORNAMENT WITH VARIOUS
STITCHES.]
Netting.
Netting is a handicraft, so ancient that it would be difficult to trace
it to its origin, or determine the date of its invention. There is
evidence to show that the making of nets for fishing and game catching
was as familiar to the earlier races of mankind as it is to us.
Practised in the first instance for the wants of life, it by degrees
developed into an art, in conjunction with embroidery, to which it was
made to serve as a foundation. The netting of every country, almost, has
a distinctive character of its own: that of Persia is known by its fine
silken meshes and rich gold and silver embroidery; that of Italy, by the
varied size and shape of its meshes and a resemblance in the style of
its embroidery to the Punto tagliato; whilst the netting of France,
known by the name of Cluny guipure, consists of a groundwork of fine
meshes with stiff close designs embroidered upon it, outlined in coarse
glazed thread.
Netting, which divides itself under two headings, netting proper, or
plain netting and net embroidery, has never yet gone out of fashion and
places are still to be found where the entire population is engaged in
this industry.
PLAIN NETTING AND THE IMPLEMENTS USED IN NETTING (figs. 611, 612,
613).—Plain netting consists of loops, secured and rendered independent
of one another by knots. For forming and tightening these loops and
knots the following implements are necessary; in the first place, a
netting needle; these are generally made of steel, split and flattened
at both ends, with a hole bored through them below the fork at the one
end, in which the thread, fig. 611, is secured, before it is wound on
lengthwise between the forks. They are numbered as to size like knitting
needles. There are netting needles likewise of bone, ivory, wood and
tortoise-shell for twine and thick materials; these are without hole,
fig. 612.
[Illustration: FIG. 611. NETTING NEEDLE OF STEEL.]
[Illustration: FIG. 612. NETTING NEEDLE OF IVORY.]
The thread must be wound on very tightly, and not too much of it at a
time, that the needle may slip easily through the loops. The mesh, or
spool, fig. 613, whether of ivory, bone, steel or wood, should be smooth
and round and of the same thickness throughout, so that the loops, made
upon it, may be all of one size and easily slipped off.
[Illustration: FIG. 613. MESH OR SPOOL OF IVORY.]
For long loops a flat mesh is best, and in all cases, the needle and
mesh should be selected with a view, both to the material employed, and
the size of loop required.
In addition to these two implements, a cushion, weighted with lead will
be required, to pin the foundation loop to, on which the first row of
netting is worked.
MATERIALS SUITABLE FOR NETTING.—These, of course depend on the
purpose of the netting: silk, twine, wool and cotton, can all be used
and each possesses its advantages and disadvantages. Silk has the finest
gloss but when it is strongly twisted it is very apt to knot, and when
loosely twisted, does not make firm knots. It is difficult to get linen
thread with a smooth uniform twist and moreover it soon frays in the
working; wool is too elastic a fibre and is unsuitable for washing
purposes, cotton remains therefore, in every respect the most desirable
material, being both smooth and uniformly twisted; as qualities, more
especially adapted for netting we may mention the following: Fil à
pointer D.M.C, Cordonnet 6 fils D.M.C (crochet cotton), Fil à dentelle
D.M.C (lace thread), and even Coton à tricoter D.M.C[A] (knitting
cotton).
NETTING STITCHES.—The loops are always the same—four-cornered
whether they be square or oblong—and connected together, though secured
and rendered independent of one another by knots. By different ways of
passing the thread over the mesh and connecting the loops together, the
following stitches are produced: 1° plain loop, 2° double loop, 3°
oblong loop, 4° honeycomb loop, 5° twisted loop.
[Illustration: FIG. 614. FIRST POSITION OF THE HANDS.]
1° PLAIN LOOP. FIRST POSITION OF THE HANDS (fig. 614).—Every kind of
netting requires a foundation loop, from 10 to 20 c/m. long, made either
of Cordonnet 6 fils D.M.C Nos. 3 to 10, or Fil à pointer D.M.C No.
10[A], which is pinned to the cushion. Fasten the working thread to the
foundation loop; then take the mesh in the left hand, holding it between
the thumb and forefinger, with the other fingers extended beneath. Take
the needle filled with thread in the right hand and pass the thread
downwards over the mesh and over the second, third and fourth fingers,
inside, carry it up behind the third finger and lay it to the left under
the thumb by which it has to be held fast.
[Illustration: FIG. 615. SECOND POSITION OF THE HANDS.]
SECOND AND THIRD POSITION OF THE HANDS (figs. 615 and 616).—Carry the
thread down behind the second, third, fourth and fifth fingers, and put
the needle through the loop on the fingers and behind the mesh, through
the foundation loop, thus forming a second loop, which you hold back
with the little finger of the left hand. Then gradually drawing up the
thread that runs from the mesh, let go the loop held down by the thumb;
then by degrees let go also, the loop which lies over the second, third
and fourth fingers, still holding the last loop fast with the little
finger; finally you release this too and pull up the knot thus formed
close to the mesh with the right hand. This completes the stitch. The
next stitches are made in the same way; whether they are to serve for
casting on or for a netted foundation. The mesh is drawn out at the end
of each row, the work turned and the mesh held beneath the last row, in
readiness for the next, in making which you pass your needle through
each loop. These diamond-shaped loops form a diagonal net.
[Illustration: FIG. 616. THIRD POSITION OF THE HANDS.]
2° DOUBLE LOOP.—To make a double loop put the thread two or three
times round the mesh.
3° OBLONG LOOP.—For oblong loops, the knots must be made a little
distance from the mesh.
4° HONEYCOMB LOOP.—Make an oblong loop, pass the thread round the
fingers, but not over the mesh as in plain netting, put the needle, not
into the loop of the previous row, but between the loop, just made. The
knot which is made in the same way as in plain netting, must be drawn
close up to the mesh; the two threads of the loop should lie side by
side on the mesh. The loops in honeycomb netting are six-sided.
5° TWISTED LOOPS.—Pass the thread, as in plain netting, over the mesh
and fingers, but before letting the thread which is under the thumb go,
pass the needle from right to left under the loop you are making and the
thread, and only then draw up the knot.
Although in netting the loops cannot be formed in as many different ways
as in knitting or crochet, they admit of a certain variety, as the
following explanations will show.
PATTERNS PRODUCED IN NETTING BY USING MESHES OF DIFFERENT
WIDTHS.—Plain netting can be varied by making one row of loops over a
large mesh and one over a small one, or several rows over the large and
several over the small, alternately, changing the meshes at regular
intervals.
[Illustration: FIG. 617. PATTERNS PRODUCED IN NETTING BY INCREASING AND
DECREASING.]
PATTERNS PRODUCED IN NETTING BY INCREASING AND DECREASING (fig.
617).—Patterns of this kind are made by netting the meshes together in
regular sequence and taking up as many meshes as you have netted
together, or vice versa. You may increase and decrease in the same rows,
or at an interval of so many rows.
[Illustration: FIG. 618. LOOSE LOOPS IN CLUSTERS.]
Two sizes of thread should be used for this patterns. To show the
relation they should bear to one another, we instance: Fil à pointer
D.M.C No. 30 with Fil à dentelle D.M.C No. 50[A], or Coton à tricoter
D.M.C Nos. 14 and 30[A], with Coton à tricoter D.M.C No. 50[A], or
Coton à repriser D.M.C No. 25 with No. 100.[A]
Begin by 3 rows of plain netting with the finer thread over the small
mesh, followed by one row with the coarser thread over the large mesh;
then, with the coarse thread over the large mesh, one row, in which you
net every two loops together and one row, with two loops in every one,
so that the number of loops remains the same. These are followed by 3
rows of plain netting with the fine thread on the small mesh.
[Illustration: FIG. 619. LOOSE LOOPS IN CLUSTERS. WORKING DETAIL OF FIG.
618.]
LOOSE LOOPS IN CLUSTERS (figs. 618 and 619).—These clusters of loose
loops are made in the following manner:
1st row—one loop, the knot of which must be a little distance from the
mesh; put the thread over the mesh and the needle through the loop where
the knot is; repeat this three or four times, making the loops all of
the same length. Then unite all the loops with one knot, carrying the
needle from right to left, round the loops, instead of putting it
through the loop of the previous row.
2nd row—make one loop over each loop of the first row, leaving out the
loops that form the cluster.
As may be gathered from the drawing, many different patterns can be
worked upon the netting in this manner.
[Illustration: FIG. 620. NETTING COMPOSED OF PLAIN, DOUBLE AND OBLONG
LOOPS.]
NETTING COMPOSED OF PLAIN, DOUBLE AND OBLONG LOOPS (fig.
620).—Netting composed of large and small loops is the kind generally
used as a groundwork for embroidery. The loops of it are straight;
diamond netting will serve the same purpose, but as it is less commonly
used we have given the preference to the straight.
The whole first row consists of a double and a plain loop alternately;
the second, entirely of oblong loops, which are made by passing the
thread only once over the mesh, and so, that in netting on the double
loop, the knot is brought close to the needle, where as, in netting the
plain loop, it hangs free; so that, as shown in fig. 620, all the loops
of the 2nd row are of the same length. In the 3rd row, which is like the
first, the plain loops should come between the small holes and the
double ones between the large holes.
[Illustration: FIG. 621. CIRCULAR NETTING COMPOSED OF LONG AND SHORT
LOOPS.]
CIRCULAR NETTING COMPOSED OF LONG AND SHORT LOOPS (fig. 621).—Make
thirty or thirty one loops over a large mesh with a very stout material,
such as Fil à pointer D.M.C No. 20, or a double thread of Cordonnet 6
fils D.M.C No. 30, then draw up the thread on which the loops are
strung, as tightly as possible, so as to form quite a small ring for the
centre, and fasten off.
For the next row, also made in coarse thread, fasten the thread on to a
long loop and make one loop into each loop of the first row, over a
small mesh. Use the same mesh for all the subsequent rows, which should
be worked in a finer thread, such as Cordonnet 6 fils D.M.C No. 50 or
60.
If you want to avoid fastening on the thread afresh for each row, make a
loop over the thumb.
MAKING LOOPS OVER THE THUMB.—Put the thread, as for a plain loop over
the mesh and fingers, and put the needle through the loop, likewise as
for a plain loop, but before tightening the knot, draw the mesh out of
the loop just made and make it exactly as long as the loop above.
[Illustration: FIG. 622. CIRCULAR NETTING FORMED BY INCREASES.]
CIRCULAR NETTING FORMED BY INCREASES (fig. 622).—Make 10 loops on the
foundation loop, close the ring, then go on, making a row with one knot
in the first loop and two knots in the second, until the net attains the
right circumference; in the subsequent rows, increase by one loop, that
is to say, make two knots in each of the previous increases.
[Illustration: FIG. 623. SQUARE OF NETTING. BEGUN.]
SQUARE OF NETTING (figs. 623 and 624).—To make squares of netting
with straight loops, begin by making two loops or three knots. Make two
knots in each of the following rows so that each row is increased by one
loop. Continue to increase until you have one loop more than the square
should number.
[Illustration: FIG. 624. SQUARE OF NETTING. COMPLETED.]
Following this row with the extra stitch, make a row without either
increase or intake and begin the intakes in the next row, joining the
two last loops of each row together by a knot. Finish the two last loops
over the thumb.
[Illustration: FIG. 625. SQUARE OF NETTING BEGUN FROM THE MIDDLE.
BEGUN.]
[Illustration: FIG. 626. SQUARE OF NETTING BEGUN FROM THE MIDDLE.
COMPLETED.]
SQUARE OF NETTING BEGUN FROM THE MIDDLE (figs. 625 and 626).—Instead
of beginning a square from the corner, in the manner just described, it
may be begun from the middle.
[Illustration: FIG. 627. STRIPE OF STRAIGHT NETTING EDGED WITH EMPTY
LOOPS.]
Cast on the required number of loops, make an intake in each row, by
omitting to take up the last loop of a row. In coming back, your first
knot will thus be made over the last loop but one of the previous row,
fig. 625. To complete the square, fasten the thread on again, to the end
of the thread of the last row, then make a similar to it, and repeat the
same rows you made at the beginning (see fig. 626).
[Illustration: FIG. 628. STRIPE OF STRAIGHT NETTING.]
STRIPES OF STRAIGHT NETTING (figs. 627 and 628).—These can be begun
and finished in two ways. The simplest way, more especially when they
are to be embroidered afterwards, is to cast on the necessary number of
loops, to decrease on one side by dropping a loop, fig. 627, or by
joining two loops together with a knot, fig. 628, and to increase on the
other side, by making two knots over one loop.
Great care must be taken not to change the order of the intakes and
increases, as any mistake of the kind would break the lines of squares,
and interfere with the subsequent embroidery, unless there happened to
be more loops in the stripe than stitches in the pattern, in which case
the superfluous loops might be cut away when the embroidery is finished.
STRAIGHT NETTING WITH A SCALLOPED EDGE (fig. 629).—The second way of
making stripes of straight netting is to begin by a square. After making
two loops on the foundation loop, make rows with increases, until you
have the required number of loops. Then make an increase in every row to
the left and leave the last loop empty in every row to the right.
Continuing the increases on the left, you net 4 rows, without
increasing or decreasing on the right, whilst in the next 4, you again
leave the outside loop empty.
[Illustration: FIG. 629. STRAIGHT NETTING WITH A SCALLOPED EDGE.]
SQUARE FRAME OF NETTING (fig. 630).—Handkerchief, counterpane and
chair-back borders can be netted in one piece, leaving an empty square
in the centre. After casting on the loops as for an ordinary square of
netting, letter _a_, increase them to double the number required for the
border. Thus, for example, if the border is to consist of 3 squares, you
make 6 loops, then leave 3 loops empty on the left and continue to work
to the right and decrease to the left, up to the dotted line from _c_ to
_c_. After this you begin to decrease on the right and increase on the
left, up to the dotted line from _e_ to _e_.
[Illustration: FIG. 630. SQUARE FRAME OF NETTING.]
Leaving the right side of the net, you now fasten on the thread at _c_,
where the 3 empty loops are, and here you make your increases on the
right side and your intakes on the left, till you come to the corner,
from whence you decrease on the right and increase on the left, up to
letter _g_. Stop on the left side and then work from left to right,
passing over the row that is marked _e_. The fourth corner, letter _b_,
is worked like any other piece of straight netting, with an intake in
each row, until there are only two loops left.
[Illustration: FIG. 631. DIAGONAL NETTING WITH CROSSED LOOPS. ORIGINAL
SIZE. MATERIALS—For the netting: Cordonnet 6 fils D.M.C Nos. 10 to 30,
or Fil à dentelle D.M.C Nos. 25 to 40.[A] For the darning stitches:
Coton à tricoter D.M.C Nos. 12 to 20, or Coton à repriser D.M.C Nos. 12
to 50.[A]]
DIAGONAL NETTING WITH CROSSED LOOPS (figs. 631 and 632). To work this
simple and effective pattern, begin by making a stripe of plain netting,
14 loops in width, for the middle. When it is long enough for your
purpose, take up all the loops on one side on a strong thread; fasten
the work to the cushion again and work 3 rows, along the other edge in
the following manner.
1st row—long loops, to be made by the thread being passed thrice over
the mesh.
2nd row—here, 3 loops are so made as to cross each other, that is, you
begin by putting your netting-needle at first into the 3rd loop,
counting from left to right, then into the 1st, and lastly into the
middle one of the three, so that the right loop leans to the left and
the left one to the right.
3rd row—one plain loop in each of the loops of the previous row. You
now, draw out the thread, run in on the other side, and run it in
through the loops last made, in order to make 3 rows again, as above
described, on the bottom side.
[Illustration: FIG. 632. WORKING DETAIL OF FIG. 631.]
When this is done, you begin the scallops, composed of 12 knots or 11
loops, or 14 loops and 15 knots = net 5 rows, leaving the outside loops
empty, fig. 632, stop on the left and proceed with: 6 knots or 5 plain
loops, 2 or 3 long loops with 3 overs, 3 plain loops = turn the work = 3
plain loops, 3 knots = turn the work = 2 loops with 3 overs, 3 knots =
turn the work = 2 plain loops, 2 knots = turn the work = cross 2 or 3
loops, according to the number you crossed in the middle, then carry the
working thread to the middle of the long loops, and connect them by 2
knots = pass the needle under the knot of the last long loop, then, on
the right side net: 3 plain loops = turn the work = 3 plain loops, 3
knots = turn the work = 2 plain loops, 2 knots = turn the work and
continue the rows of plain netting until you have only 2 loops left.
To reach the next scallop, pass the netting-needle through each hole of
the net and round each thread.
Finish off the scallops with a row of plain netting, made with a coarser
thread than the foundation.
[Illustration: FIG. 633. NETTED FRINGE.
MATERIALS—For the netting: Cordonnet 6 fils D.M.C Nos. 10 to 30 or Fil
à pointer D.M.C No. 30.[A]
For the fringes: Soutache D.M.C No. 3 or Lacets superfins D.M.C No.
4.[A]]
These netted edgings are generally made in unbleached cotton, because
the patterns afterwards embroidered upon them in coarse, white knitting
or darning cotton, show best upon it. The thread for this purpose should
be used double, and the pattern worked in darning stitches, made over 8
squares of the netting; the 8th knot is then encircled by a loop and the
thread carried down over 8 squares and a loop again made round the 8th
knot. After making 4 rows of stitches on the netting, cut 3 bars between
the rows of white stitches.
The row of openwork produced in this way has a very good effect and
greatly improves the look of the lace.
NETTED FRINGE (fig. 633).—Plain netting, pretty as it is, looks
rather poor, unless ornamented with embroidery of some kind. The double
netting, illustrated in fig. 633, will prove a welcome novelty. The
footing is worked in crochet, with braid, secured on both sides by chain
stitches.
Into every fourth of these chain stitches, net one loop, missing the 3
between. At the end of the row, turn the work and make the knot in the
middle of the 3 chain stitches, so that the 2 loops of netting cross
each other.
In the second, or rather the third row, the knots are again made first
into the front loops, into those of the first row that is; in the fourth
row, into those of the second row.
When the stripe is sufficiently wide, finish it off with tassels, made
of Soutache D.M.C No. 3. Instead of tying up the lengths of braid with a
thread, twisted round them and fastened off with a stitch, make 2 looped
knots round them with an end of the braid, where the neck of the tassel
should come.
[Illustration: FIG. 634. WIRE FRAME FOR EMBROIDERED NETTING.]
EMBROIDERED NETTING.—Embroidered netting, also known as Filet
Guipure, Cluny Guipure, and Richelieu Guipure, is a netted ground, with
patterns of one kind or another, worked upon it in a variety of
stitches.
IMPLEMENTS REQUIRED FOR EMBROIDERED NETTING.—Besides scissors,
needles and thread, a light steel frame is the only thing required, and
this renders embroidered netting very popular.
The needles should be long, and blunt; those called saddlers needles are
the best.
WIRE FRAME FOR EMBROIDERED NETTING (fig. 634).—The frame on which the
net is stretched should be made of strong iron wire, that will not bend
in the using. In shape, it may be square or oblong, according to whether
squares or edgings are to be made upon it, but the sides must be
straight, so that the net can be evenly stretched.
[Illustration: FIG. 635. MOUNTING THE NETTING ON THE FRAME.]
This wire frame must be covered, first with wadding or tow, as shown in
fig. 634, and then with silk ribbon, which must be wound tightly round
it, and more particularly at the corners, very closely, so that it may
be quite firm and not twist about when the netting is sewn in. The ends
of the ribbon should be secured by two or three stitches.
[Illustration: FIG. 636. MOUNTING THE NETTING ON THE FRAME WITH AN
AUXILIARY TAPE.]
MOUNTING THE NETTING ON THE FRAME (fig. 635).—When the netting is
exactly the size of the inside of the frame, it need only be secured to
it with overcasting stitches, set very closely at the corners.
MOUNTING THE NETTING ON THE FRAME WITH AN AUXILIARY TAPE (fig.
636).—When the netting, is smaller, the space between it and the frame,
must be filled up with strong very evenly woven, linen tape, sewn on all
round the netting.
The tape must be very tightly held in the sewing, so that it even forms
little gathers all round; this will help you to stretch the netting in
mounting it without injuring it, and is especially necessary when the
netting is not quite evenly made. Fig. 636 shows how the tape is sewn
on, the fold that has to be made at the corners, and the way to fix the
netting into the frame.
Long stripes or large pieces of work, can be mounted on waxcloth, but we
cannot recommend shortening the preparatory work in this manner, as the
squares of netting are never so regular as when they are made in a
frame.
MATERIALS FOR EMBROIDERED NETTING.—Thick threads with a strong twist
are the best for darned, or embroidered netting, such as Cordonnet 6
fils D.M.C[A] (crochet cotton), or Fil à dentelle D.M.C[A] (lace
thread).
There are however certain old kinds of embroidered netting made in soft
loose silk, for imitating which it is best to use, Coton à repriser
D.M.C[A] that being quite the best substitute for the original material.
THE STITCHES USED FOR EMBROIDERED NETTING.—These are so multifarious
and admit of so many different combinations, that not a few of them
seeing that be quite new to our readers, willsome we have never yet come
across in any book on the subject that has come under our notice.
ORDINARY DARNING STITCH (fig. 637).—The simplest stitch of all for
covering a netted ground is the ordinary darning stitch; drawing the
thread, that is to say, in and out of the number of squares, prescribed
by the pattern, and backwards and forwards as many times as is necessary
to fill them up.
[Illustration: FIG. 637. ORDINARY DARNING STITCH.]
[Illustration: FIG. 638. LINEN STITCH. FIRST STITCHES.]
The number of stitches depends, to a certain extent, on the material
employed; with Coton à broder D.M.C for example, you will have to make
more stitches than with one of the coarser numbers of Coton à repriser
D.M.C.
This is the stitch generally used for reproducing a cross stitch pattern
on a netted ground and is especially to be recommended for covering
large surfaces, curtains, counterpanes and so forth, as it is quickly
done and shows up the pattern well.
[Illustration: FIG. 639. LINEN STITCH. SECOND STITCHES.]
[Illustration: FIG. 640. LINEN STITCH. FORMATION OF THE CORNERS.]
LINEN STITCH (figs. 638 and 639).—This is the stitch most often met
with in the old embroideries, it being the one the solid parts of the
leaves and flowers, and the borders are generally worked in.
Fasten on the thread to a knot of the netting and carry it twice to and
fro, over and under the threads of the netting, so that at the end of
the row, every second thread passes under and over the thread of the
netting, as it is carried upwards again.
This constitutes the first layer of threads, the second completes the
linen stitch and is made in the same way, only across the first,
alternately taking up and missing a thread as is done, in darning. The
thread may also be carried both ways over the threads of the squares. In
this case you must draw an uneven number of threads through the squares,
otherwise the crossing of the threads will be irregular in the last
square.
LINEN STITCH. FORMATION OF THE CORNERS (fig. 640).—When linen stitch
is used for the border of a pattern, and a corner has to be formed, you
begin by carrying the threads over a given number of squares. This first
layer, especially in the case of long stripes, must be kept very slack,
and to ensure the threads being all of the same length, lay a fine mesh
or a thick knitting needle at one end and stretch the threads over it.
After carrying the second layer across a few squares, take away the mesh
or needle. The threads of the first layer become gradually shorter, from
the passage of the cross threads in and out between them, and end by
being just long enough to prevent the last embroidered squares from
being too tightly stretched.
On reaching the corner, you cross the threads of the next row, as shown
in fig. 640. The first threads of the second side form the foundation of
the corner square; from the second corner square you pass to the third;
from the third to the fourth, carrying your thread alternately over and
under the threads that were stretched for the first corner.
LOOP STITCH (POINT D’ESPRIT) (figs. 641 and 642).—This is a light
open stitch, chiefly used for making a less transparent foundation than
plain netting. Fasten the thread to the middle of one bar of the
netting, then make a loose loop to the middle of the top bar of the same
square, fig. 641, by carrying the thread, from left to right, over one
vertical and one horizontal bar of the net and inserting the needle
downwards from above under the bar and in front of the working thread.
For the second row back, also represented in fig. 641, you draw the
needle through, underneath the bar above the loop stitch and make the
loop upwards from below; in doing this the working thread must lie to
the left, in front of the needle. Fig. 642 shows how to join the rows
and pass the needle through the stitches of the preceding row.
[Illustration: FIG. 641. LOOP STITCH. 1ST AND 2ND COURSE OF THE THREAD.]
[Illustration: FIG. 642. LOOP STITCH. SEVERAL ROWS COMPLETED.]
[Illustration: FIG. 643. STAR FORMED OF LOOSE THREADS LAYING THE
UNDERNEATH THREADS.]
[Illustration: FIG. 644. STAR FORMED OF LOOSE THREADS. LAYING THE UPPER
THREADS.]
STAR COMPOSED OF LOOSE THREADS (figs. 643, 644, 645).—This star
covers 16 squares of netting. Fasten the thread to the middle knot of
the 16 squares, then carry it diagonally over 4 squares, three times
from left to right under a knot of the foundation and three times from
right to left. In this way, the bottom rays of the star are formed. For
the stitches that complete the figure, you start from the middle and
following the direction of the little arrow in the illustration, you
cover the netting with 3 horizontal and 3 vertical threads, carried
over 4 squares. When you have laid the vertical threads, slip the needle
4 or 5 times round in a circle, under the diagonal and over the straight
threads, but always over the bars of the netting. This completes the
star, as it is represented in fig. 645. Care must be taken to make the
stitches lie quite flat side by side, and not one on the top of the
other.
[Illustration: FIG. 645. STAR FORMED OF LOOSE THREADS. FINISHED.]
DARNING STITCH (POINT DE REPRISE) (figs. 646 and 647).—Little flowers
and leaves are generally executed in this stitch; the first course of
the thread is shown in fig. 646. Leaves can be made with one, two or
three veins. Carry the needle, invariably from the middle, first to the
right and then to the left, under the threads of the foundation and push
the stitches close together, as they are made, with the point of your
needle. This you will be able to do most easily by holding the work so
as to make the stitches towards you.
[Illustration: FIG. 646. LEAVES WORKED IN DARNING STITCH. BEGUN.]
[Illustration: FIG. 647. LEAVES WORKED IN DARNING STITCH. COMPLETED.]
For a leaf with only one division or vein, like the left leaf in fig.
646, merely run the needle through the middle of the threads, whereas
for a leaf with two or three veins, you must run it, over and under,
either one, or two threads (see the right leaf in fig. 646).
In working leaves of this kind in darning stitch, you must draw your
stitches at the top and bottom of the leaf rather tighter than in the
middle, so as to give them the proper shape. If you wish to make them
very slender at the bottom, you can finish them off with a few
overcasting stitches.
Fig. 647 represents two leaves completed, one with one vein and the
other, with two.
POINTED SCALLOPS IN DARNING STITCH (fig. 648).—The simplest way to
work these scallops is to carry a thread, as shown in the illustration,
to and fro over the square, from the knot in one corner to the middle of
the bar above and downwards to the opposite knot, round which the thread
is carried and passed upwards again to the middle. As the scallop must
always be begun from the top, you will have, two foundation threads on
one side and three on the other. Here likewise, you must push the
threads as closely together as possible with the needle.
[Illustration: FIG. 648. POINTED SCALLOPS IN DARNING STITCH.]
[Illustration: FIG. 649. POINTED SCALLOPS IN BUTTON-HOLE STITCH.]
POINTED SCALLOPS IN BUTTON-HOLE STITCH (fig. 649).—Another quite as
pretty and easy way of working pointed scallops on a netted foundation
is by making two button-hole stitches before crossing to the opposite
side. As shown in the foregoing illustration, you begin by stretching
single or double foundation threads across; then beginning at the point,
you make, alternately right and left, 2 button-hole stitches over the
foundation threads, so that the working thread is only carried across to
the opposite side after every second stitch.
VEINED POINTED SCALLOPS (fig. 650).—A third way of making pointed
scallops is by first stretching a thread to and fro across the middle of
the square, after which you slip the needle from left to right under the
middle thread, and underneath the left bar from above. Then you carry
the needle, from right to left, over the foundation thread and under the
right bar and so on. The one thread must be drawn tightly round the
other, in order that the stitches may form close and evenly shaped
veins, like small cords, on the wrong side of the scallop. There must be
enough stitches to completely cover the foundation thread that crosses
the middle of the square.
[Illustration: FIG. 650. VEINED POINTED SCALLOPS.]
[Illustration: FIG. 651. POINTED SCALLOPS IN VENETIAN STITCH.]
POINTED SCALLOPS IN VENETIAN STITCH (fig. 651).—The prettiest
scallops of all are those worked in Venetian stitch. You begin, by
making from 8 to 10 button-hole stitches over one bar of the netting,
then you work on with the same stitch backwards and forwards, making one
stitch less in each row, until you come to the one which forms the point
of the scallop and is fastened to the bar above; you carry the working
thread back on the wrong side to the lower bar, and then under the
button-hole stitches to the next square of the netting. Scallops worked
in this manner, can be overcast round the edges in the way described
further on, in fig. 660.
WHEELS EMBROIDERED ON NETTING (figs. 652 and 653).—To make wheels or
spiders, as they are also called, you have first to fasten the thread to
the middle knot of four squares, thence you carry it diagonally right
and left, fig. 652, right detail, across the empty squares of netting
and the knot, and return to the middle, overcasting your first thread
by the way, so as to form a closely twisted cord. This is called cording
a thread.
Having reached the centre, carry the working thread round and round,
under and over the corded threads and under the bars of the netting till
the wheel covers half the bars.
[Illustration: FIG. 652. LAYING THE THREADS FOR A WHEEL AND BEGINNING OF
THE WHEEL.]
[Illustration: FIG. 653. WHEELS WORKED IN TWO WAYS.]
Fig. 653 shows, on the right, a finished wheel, and on the left, another
way in which it can be made, and indicates the course of the thread over
and under the lines, as in a darn. These details show also how, when the
foundation thread of the wheel starts from a corner, it is left single
in the first square until the wheel is finished; then the needle is
slipped back along the little spoke, opposite to the single thread, and
through the wheel, and the single thread is corded like the others.
[Illustration: FIG. 654. RIBBED WHEELS.]
[Illustration: FIG. 655. RIBBED SQUARES OR LOZENGES.]
RIBBED WHEELS (fig. 654).—Make the foundation of the wheels as
before, over 8 threads. To form the ribs at the back of the wheels, see
fig. 654; make a back stitch, on the right side, over a bar of the
netting, and carry on the needle under one bar, so that the thread that
lies outside always crosses 2 bars of the netting.
In this case you must make circles of thread enough, to cover the bars
completely, not half, as before.
The same stitches, as fig. 654 shows, can be made on either side of the
embroidery, and so as to form, either a square or a lozenge (see fig.
655).
[Illustration: FIG. 656. WHEELS SET WITH BUTTON-HOLING.]
WHEELS SET WITH BUTTON-HOLING (fig. 656).—A very pretty lace-like
effect is produced by encircling the wheels in large squares of netting
with a double setting of stitches. The left detail of fig. 656 shows how
the thread, having been passed under the wheel and twisted once round
the single thread, is carried all round the square and forms 8 loops.
The arrow shows the way in which the loops are taken up, and the first
ring of stitches round the wheel is finished.
The second detail of the same figure explains the course the thread,
that forms the second ring, has to take through the loops and between
the bars; whilst the white line shows the passage of the thread over the
second ring. The third detail represents a wheel, completed.
[Illustration: FIG. 657. STAR WITH ONE-SIDED BUTTON-HOLE STITCHES.]
STAR WITH ONE-SIDED BUTTON-HOLE STITCHES (fig. 657).—The pattern
represented in fig. 657, is the quickest to work that we know of. Two
button-hole stitches made upon the outside bar of a square and a simple
crossing of the thread at the bottom, produce elongated triangles which
should always be begun from the knot. Two triangles stand exactly
opposite to each other in one square, and the square that comes in the
middle of the four thus filled, is ornamented with a small wheel.
[Illustration: FIG. 658. ROUNDED CORNERS ON NETTING.]
[Illustration: FIG. 659. LINEN STITCH SET WITH DARNING STITCH.]
[Illustration: FIG. 660. LINEN STITCH SET WITH CORD STITCH.]
ROUNDED CORNERS OF NETTING (fig. 658).—Darning stitches, made over a
thread carried diagonally across one square and the adjacent corners of
that and two other squares, produce the figure illustrated in fig. 658.
The accompanying detail shows the mode of working.
The number of stitches depends on the material you use; there should be
no more than can lie quite flat, side by side, on the diagonal thread.
LINEN STITCH, SET WITH DARNING STITCH (fig. 659).—There are some
patterns it would hardly be possible to work on netting unless you could
soften the outlines by darning stitches, as shown in the foregoing
figure.
When employed as a setting to linen stitch, there should be fewer than
in fig. 658; you may also, instead of interrupting them at every corner,
carry them all round a square, (see the right detail of the figure).
LINEN STITCH SET WITH CORD STITCH (fig. 660).—Many figures are also
either corded or edged with twisted thread; both ways are represented
in the illustration. In the latter case you can use the same thread as
for the linen stitch, or if you wish the setting to be very pronounced,
a thicker one. For instance, if the netting be made of Cordonnet 6 fils
D.M.C No. 25[A] we recommend Fil à pointer D.M.C No. 15 or 20[A] for
the setting. This difference of material is especially noticeable in the
old Cluny Guipure, where the figures worked in linen stitch are edged
with a thread like a cord. But if the linen stitch be bound with cord
stitch, the same thread must be used for it, as for the foundation. A
soft material, like Coton à repriser, makes the best padding for the
overcasting stitches.
[Illustration: FIG. 661. FLOWER IN DOT STITCH ON A FOUNDATION OF LINEN
STITCH.]
FLOWER IN DOT STITCH ON A FOUNDATION OF LINEN STITCH (fig. 661).—With
the help of this stitch, which is described in the chapter on white
embroidery and represented in fig. 179, a great variety of little
supplementary ornaments can be made, on every description of netted
ground.
[Illustration: FIG. 662. BORDERING IN BUTTON-HOLE STITCH.]
BORDERING IN BUTTON-HOLE STITCH (fig. 662).—Scalloped edges in netting
should be button-holed; 2 or 3 padding threads should be run in first,
following the bars of the netting, over which the button-holing is done;
the bars of the netting must not be cut away until the edge be finished.
CUT WORK IN EMBROIDERED NETTING (fig. 663).—Cut work here means half
covering the bars of the netting with button-hole stitches and half
cutting them away with scissors. The inner bars are frequently
ornamented with a double button-hole edging and knotted picots, see figs.
698 and 699 in the next chapter. You slightly separate the stitches of
the first row of button-holing so as to be able to introduce the thread
of the second row between them.
[Illustration: FIG. 663. CUT WORK IN EMBROIDERED NETTING.]
[Illustration: FIG. 664. STRAIGHT LOOP STITCH.]
STRAIGHT LOOP STITCH (fig. 664).—In the first row you carry the
thread over one bar and slip it through behind a knot; in the second you
do the same thing, only that above, your needle will pass under 3
threads, two of them the threads of the loop of the first row and the
third a bar of the net. In every square 4 threads cross each other.
[Illustration: FIG. 665. WAVED STITCH.]
WAVED STITCH (fig. 665).—This stitch, which forms a close waved
ground, is produced by passing the thread in each row of the netting
over a square and behind a knot. When the pattern admits of it, as it
mostly does, a considerably thicker thread is used for this stitch and
for the stitches represented in figs. 667, 668, 669 and 670, than that
in which the netting is made. When the netted ground is of Fil à
dentelle D.M.C No. 50,[A] the embroidery upon it may very well be done
in Cordonnet 6 fils. D.M.C No. 10[A], or Fil à pointer D.M.C No. 30.[A]
INTERSECTED LOOP STITCH (fig. 666).—Begin by covering the whole
surface to be embroidered with plain loop stitches, then stretch threads
diagonally across the squares of the netting and the loop stitches; one
set of threads running over the stitches and under the knots of the
netting, the other under the first and second threads of the loop
stitches and over the first crossed threads and the knots.
The laying and stretching of these threads must, it is hardly necessary
to say, be systematically and regularly done.
[Illustration: FIG. 666. INTERSECTED LOOP STITCH.]
GROUND WORKED IN HORIZONTAL LINES (fig. 667).—Make half cross
stitches over 4 squares of netting, by passing the thread alternately
over and under 3 knots, and under 3 squares of the netting. In the
second row, cross the threads over those of the first row, as is shown
in our engraving.
GROUND WORKED IN STITCHES PLACED ONE ABOVE THE OTHER (fig.
668).—Cover a whole row of squares with cross stitches and leave 3 rows
of squares empty. When you have a sufficient number of rows of cross
stitches, take a long needle and pass it upwards from below, and from
right to left, under the two bars of the third upper square; then pass
downwards to the first square of the 3 bottom rows and under the bars
from right to left, so as again to leave 3 squares between the fresh
stitches. The next row of stitches is made in the same manner, so that
the stitches are not only set contrary ways but reciprocally cover each
other.
LATTICED GROUND (fig. 669).—Begin by running the thread, to and fro,
under two vertical bars and over three horizontal ones. When the ground
is entirely covered, carry your thread from right to left, under the
bars over which the first rows of threads are crossed; then take it over
the long crosses, that correspond to 5 squares of netting, and pass it
in the same line under the bars of the netting. In coming back, the long
stitches cross each other over the stitches of the first rows.
[Illustration: FIG. 667. GROUND WORKED IN HORIZONTAL LINES.]
[Illustration: FIG. 668. GROUND WORKED IN STITCHES PLACED ONE ABOVE THE
OTHER.]
[Illustration: FIG. 669. LATTICED GROUND.]
[Illustration: FIG. 670. GROUND WORKED IN RUSSIAN STITCH.]
GROUND WORKED IN RUSSIAN STITCH (fig. 670).—Pass the thread from left
to right, under a bar of the netting, carry it downwards over 4 squares
and pass it again, from left to right, under the bar, then upwards,
again over 4 squares of netting and so on. The stitches of the next rows
are made in the same manner; you have only to see that the loops formed
by the stitches all come on the same line of knots.
GROUND WORKED IN TWO SIZES OF THREAD (fig. 671).—Herewith begins the
series of stitches, referred to at the beginning of the chapter, copied
in part from one of the oldest and most curious pieces of embroidered
netting we have ever met with. The copies were worked with Cordonnet 6
fils D.M.C No. 25 and écru Fil à dentelle D.M.C No. 70[A]; the former
being used for the darning and the almond-shaped stitches between; the
latter for the button-hole stitches. Wherever two sizes of thread are
used for one pattern, all the stitches in the coarse thread should be
put in first and those in the fine, last.
[Illustration: FIG. 671. GROUND WORKED IN TWO SIZES OF THREAD.]
GROUND WITH WHEELS AND LOOP STITCH (fig. 672).—You begin with the
coarse thread and finish all the wheels first, making them each over 4
threads of the netting; then with the fine thread, you make loop
stitches between them, in rows, as shown in figs. 641 and 642.
GROUND WORKED IN DARNING AND LOOP STITCH (fig. 673).—The darning
stitches are made in the coarse thread, over 4 squares of the netting,
in a horizontal direction, with loop stitches, in the fine thread, made
between them, over the same number of squares.
[Illustration: FIG. 672. GROUND WITH WHEELS AND LOOP STITCH.]
GROUND WORKED IN TWO SIZES OF THREAD (fig. 674).—Carry the coarse
thread, from right to left, under the first knot of the netting, and
then under the next, from left to right. This has to be done twice, to
and fro, so that the squares of the netting are edged on both sides with
a double layer of threads.
When the whole foundation has been thus covered, take the fine thread
and make loop stitches in the squares between the other rows of
stitches, passing the needle for that purpose over the double stitch.
Lastly, intersect the loop stitches with straight threads and pass the
needle each time through the knot of the netting.
[Illustration: FIG. 673. GROUND WORKED IN DARNING AND LOOP STITCH.]
[Illustration: FIG. 674. GROUND WORKED IN TWO SIZES OF THREAD.]
[Illustration: FIG. 675. GROUND WORKED WITH CROSS STITCHES IN ONE SIZE
OF THREAD.]
GROUND WORKED WITH CROSS STITCHES IN ONE SIZE OF THREAD (fig.
675).—This pattern, very like the foregoing one, consists of 3 diagonal
rows of stitches, worked to and fro, with cross stitches made over them.
You may also begin with the cross stitches, in the fine thread, and work
the triple stitches over them, in the coarse.
GROUND WORKED WITH DARNING AND CORD STITCHES (fig. 676).—Patterns,
executed chiefly in darning stitches, in a comparatively coarse thread,
present a closer and heavier appearance than those we have been
describing. Here, every other square of the netting is filled, as
closely as possible, with stitches; the empty squares between are
intersected diagonally with corded threads.
[Illustration: FIG. 676. GROUND WORKED WITH DARNING AND CORD STITCHES.]
[Illustration: FIG. 677. GROUND WORKED WITH SQUARES AND WHEELS.]
[Illustration: FIG. 678. GROUND WORKED WITH SQUARES AND WHEELS.]
GROUND WORKED WITH SQUARES AND WHEELS (figs. 677, 678, 679).—A ground
very often met with in old embroidered netting, consists of diagonal
lines of squares, closely filled with darning stitches, alternating with
diagonal lines of squares, each with a small wheel in the middle.
In fig. 678, the darning stitches, and the wheels, which are both worked
with the same material, cover 4 squares of the netting.
Larger expanses of netting may also be entirely filled with wheels, fig.
679. To make a really satisfactory grounding of this kind, you should be
careful always to carry your thread over the bars of the netting and
under the threads that are stretched diagonally across.
GROUND WORKED IN CROSS AND DARNING STITCH (fig. 680).—You begin, as
before, by making the close darning stitches, and then proceed to the
cross stitches. To give them the right shape, finish all the rows of
stitches one way first; in the subsequent rows, that cross the first
ones, you introduce the thread between the stitches that were first
crossed.
[Illustration: FIG. 679. GROUND WITH LARGE WHEELS.]
GROUND OF GEOMETRICAL FIGURES (fig. 681).—This pattern, quite
different from all the others, consists of simple geometrical lines.
Fasten the thread to a knot of the netting, then carry it, always
diagonally, under 3 other knots and repeat this 3 times, after which,
carry it once round the bar of the netting, to fasten it, and back again
to the knot which it already encircles, and from thence begin a new
square. Owing to your having always to bring the thread back to the knot
whence the next square is to begin, you will have 4 threads on two of
the sides and 6 on the two others.
[Illustration: FIG. 680. GROUND WORKED IN CROSS AND DARNING STITCH.]
In the second and subsequent rows, the needle has to pass twice under
the angles that were first formed, in order that, over the whole
surface, all the corners may be equally covered and connected.
NETTED INSERTION WORKED IN PLAIN DARNING STITCH (fig. 682).—The taste
for ornamenting not only curtains but bed and table linen also, with
lace and insertion of all kinds, to break the monotony of the large
white surfaces, is becoming more and more general and the insertion here
described will be welcome to such of our readers as have neither time
nor patience for work of a more elaborate nature.
The way to make straight netting has already been fully described in
figs. 625, 626, 627, 628, 629 and 630, and darning stitch in fig. 637.
To those who wish to be saved the trouble of making the netting
themselves, we can strongly recommend various fabrics, intended to take
its place, more especially Filet Canevas, which is an exact imitation of
the finest hand-made netting. The centre part of the pattern in fig.
682, is worked in rows of horizontal darning stitches, the narrow border
in vertical ones.
[Illustration: FIG. 681. GROUND OF GEOMETRICAL FIGURES.]
[Illustration: FIG. 682. NETTED INSERTION WORKED IN PLAIN DARNING
STITCH. MATERIALS—For the netting: Cordonnet 6 fils D.M.C No. 25.—For
the darning stitch: Coton à broder D.M.C No. 25, or Coton à repriser
D.M.C Nos. 12 to 50, white or écru.[A]]
[Illustration: FIG. 683. EMBROIDERED GROUND OF NETTING. MATERIALS—For
the netting: Fil à dentelle D.M.C Nos. 25 to 50. For the darning stitch:
Cordonnet 6 fils D.M.C No. 15, or Fil à pointer D.M.C No. 30.—For the
loop stitch: Fil à dentelle D.M.C or Cordonnet 6 fils D.M.C according to
the size of the netting thread.]
GROUND OF NETTING EMBROIDERED (fig. 683).—We have already had
occasion, in the foregoing explanations, to point out the advantage of
embroidering with two sizes of thread, but it is only in a piece of work
of a certain size that it is possible really to judge of the excellent
effect produced by the use of two threads of different sizes.
The principal lines of the pattern, which are in darning stitch, are
worked in a very coarse thread with a strong twist, Fil à pointer D.M.C,
whilst the loop stitches are in Cordonnet 6 fils D.M.C.
Our model was worked in écru thread but there is nothing to prevent
several colours being introduced, for instance écru, black or
Gris-Ficelle 462 for the netted foundation; Rouge-Cardinal 346, for the
darning stitches, and Chiné d’or D.M.C green and gold or blue and gold,
for the loop stitches and the threads that are carried across inside.
[Illustration: FIG. 684. EMBROIDERED SQUARE OF NETTING. MATERIALS:
Cordonnet 6 fils D.M.C Nos. 15 to 30, or Fil à dentelle D.M.C Nos. 15 to
40, white or écru.[A]]
EMBROIDERED SQUARE OF NETTING WITH TWO KINDS OF LACE SUITABLE FOR THE
BORDER (figs. 684, 685, 686).—Large pieces of embroidered netting are
generally made up of squares and stripes, joined together with ribbon
and fine linen insertions. It is easier and less cumbrous to make the
netting in separate pieces. Squares of different patterns can also be
combined with crochet and pillow lace, in this case of course the
squares have to be arranged with some system.
Fig. 685 represents a lace edging intended for the square fig. 684,
which shows how even in such a simple pattern as this, several colours
may be successfully introduced.
Fig. 686 is a handsomer and more elaborate pattern for the same kind of
purpose. The loop stitches and the linen stitches should be worked in a
very light shade; instead of the colour indicated at the foot of the
engraving, Rouge-Géranium 353, Violet-Mauve 377 or Jaune-Rouille 365 may
be used; for the netting and the loop stitches you may combine, with the
first shade, two shades of Brun-Caroubier 303 and 357, with the second,
two shades of Jaune-vieil Or 678 and 680 and with the third, two shades
of Rouge-Cardinal 346 and 348.
[Illustration: FIG. 685. LACE EDGING FOR THE SQUARE, FIG. 684.
MATERIALS: The same as for fig. 684, and Or fin D.M.C pour la broderie
No. 30. COLOURS—For the netting and the loop stitch: White or
écru.—For the darning stitch: Brun-Caroubier 303 and Rouge-Grenat
335.[A]]
[Illustration: FIG. 686. LACE EDGING. MATERIALS: The same as for 684.
COLOURS—For the netting: écru.—For the ground in loop and linen
stitch: Bleu pâle 668.—For the bars in darning stitch: Gris-Tilleul 391
and 393.[A]]
PATTERN FOR GROUND (fig. 687).—The peculiar charm of this most
unpretending pattern is chiefly due to the variety of material and
colour introduced into it. The netted ground is made of dark brown
Cordonnet 6 fils D.M.C No. 25, worked over, in the first instance, with
loop stitches in a pale grey, which are afterwards connected by darning
stitches in Coton à repriser Gris-Tilleul 392.
[Illustration: FIG. 687. PATTERN FOR GROUND. MATERIALS—For the netting:
Cordonnet 6 fils D.M.C Nos. 15 to 30. For the embroidery: Coton à
repriser D.M.C No. 25. COLOURS: Brun-Havane 455, Gris-Noisette 423,
Jaune-vieil-Or 680, Gris-Tilleul 391 and Rouge-Géranium 352.[A]]
The same material in Rouge-Géranium, is used for the little centre
squares and the pink crosses, and isolated darned squares are framed
with loose cord stitches in Coton à repriser colour Jaune-vieil-Or 680.
We can also recommend, for the same pattern, the following combination
of colours, all to be found on the D.M.C colour card; namely, Bleu pâle
668 for the netting; Chiné d’or, gold with dark blue for the loop
stitches; Ganse turque D.M.C No. 12 (Turkish gold cord) for the darning
stitches, between the loop stitches; Coton à broder or Cordonnet 6 fils
in Rouge-Cornouille 450, for the detached darned squares and Coton à
repriser, in Jaune-d’Or 667 for the setting of all the different parts
of the pattern.
[Illustration: FIG. 688. EMBROIDERY ON NETTING WITH DIFFERENT-SIZED
LOOPS. MATERIALS—For the netting: Fil à dentelle D.M.C No. 40. For the
embroidery: Coton à broder D.M.C No. 16, white or écru.[A]]
EMBROIDERY ON NETTING WITH DIFFERENT-SIZED LOOPS (fig. 688).—The
netting, described and represented in fig. 620, with plain, oblong and
double loops, here forms the ground for the embroidery.
[Illustration: FIG. 689. SQUARE IN CUT NETTING.]
[Illustration: FIG. 690. LACE EDGING IN CUT NETTING. MATERIALS: Fil à
dentelle D.M.C Nos. 25 to 50, in three shades of one colour.]
In order to make the isolated loop stitches, the thread which forms the
cross in the middle must be carried to the middle of the bar, the loops
that form the stitches must be finished and the thread carried back to
the knot whence it started. It must then be taken three times backwards
and forwards over the foundation thread and the two bars of the
netting, when the stitches, into and over 3 squares of the netting,
should be made. The last row in the engraving shows the pattern in the
successive stages of its development.
[Illustration: FIG. 691. NETTING INSERTION MATERIALS—For the netting:
Cordonnet 6 fils D.M.C No. 40 white or écru.—For the embroidery: Ganse
turque D.M.C Nos. 6 and 12.]
SQUARE AND EDGING IN CUT NETTING (figs. 689 and 690).—Few patterns
admit of such a successful application of all the stitches hitherto
described, as the square and edging presented to our readers in the two
subjoined figures. On a netted ground of rather fine thread, we have in
the first place, linen stitch, in the border, worked in rather a coarser
thread than the ground; then raised wheels, button-holed bars with picots
in the centre, plain wheels very close together, and long ribbed bars
worked in darning stitch.
The edging, to match the square, is worked in the original in pale
shades, in contrast to the square which is executed entirely in écru
thread. The squares in the netted footing of the lace are loosely
overcast with pale Violet-Mauve 316, the same colour is also used for
the wheels in the outside edge, each of which fills a square, and for
the loop stitches round them; whilst the middle one of the three upper
ribbed wheels and the star are worked in dark Violet-Mauve 315. The
crosses in linen stitch, the three lower ribbed wheels and the long
ribbed bars in darning stitch, are in Gris-Tilleul 392.
NETTED INSERTION (fig. 691).—This is a copy of a beautiful piece of
embroidered netting, to all appearance, several centuries old, and in a
state that rendered, even the most delicate handling almost impossible.
After several experiments, the best result has been arrived at, and the
Turkish cord in which the original is made, has now been manufactured
for netting purposes, as well as for other kinds of decorative work,
already alluded to, and referred to again later on.
The first foundation, that is, the actual netting, for a thing of this
kind, should be made in white or écru thread, with very small meshes;
the pattern itself is embroidered on the netting with Ganse turque D.M.C
No. 12; this material, écru and gold mixed, gives the work a glittering
and peculiarly elegant appearance, unobtainable in any other.
The execution is extremely easy, it being worked entirely in darning
stitch; but the drawing should be copied with great accuracy and the
wide braid very carefully sewn on with close stitches round the squares,
which are filled in with darning stitches made in Ganse turque No. 12.
Any netting pattern can be copied in this braid, and the simplest piece
of work of the kind is worth mounting on a rich foundation of silk,
brocade, velvet or plush. To give a single example, the insertion here
described and illustrated, was mounted on slate-blue plush and has been
universally admired.